On Sat, Sep 18, 2010 at 8:09 PM, Jiri Kosina <jkosina@xxxxxxx> wrote: > On Sat, 18 Sep 2010, Mat wrote: > >> Hi everybody, >> >> I've been noticing this also since a few days and have the same mouse >> model. For me it's getting triggered when hald (which seemingly still >> is needed by KDE4) is started: >> >> 50.778558] BUG: unable to handle kernel NULL pointer dereference at (null) >> [ 50.779448] IP: [<ffffffff8159c4b3>] hiddev_open+0xa3/0x1b0 >> [ 50.780371] PGD 0 >> [ 50.781480] Oops: 0000 [#1] PREEMPT SMP >> [ 50.782671] last sysfs file: >> /sys/devices/pci0000:00/0000:00:1f.2/host5/target5:0:0/5:0:0:0/block/sdd/size >> [ 50.783649] CPU 7 >> [ 50.783659] Modules linked in: fglrx(P) firewire_ohci i2c_i801 >> firewire_core e1000e wmi shpchp tg3 libphy e1000 scsi_wait_scan >> sl811_hcd ohci_hcd ssb usb_storage ehci_hcd >> [ 50.785661] >> [ 50.786647] Pid: 5576, comm: hald-probe-hidd Tainted: P >> 2.6.36-rc4_plus_v2+ #2 FMP55/ipower G3710 >> [ 50.787712] RIP: 0010:[<ffffffff8159c4b3>] [<ffffffff8159c4b3>] >> hiddev_open+0xa3/0x1b0 >> [ 50.788784] RSP: 0018:ffff8801bafe9ca8 EFLAGS: 00010296 >> [ 50.789889] RAX: 0000000000000000 RBX: ffff8801bb155400 RCX: 0000000000000004 >> [ 50.790998] RDX: ffffffff81de4008 RSI: ffffffff81a03638 RDI: ffff8801bb1fc030 >> [ 50.792105] RBP: ffff8801bb1f0000 R08: ffffea00060eec88 R09: 0000000000000000 >> [ 50.793266] R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000 >> [ 50.794478] R13: 00000000ffffffed R14: ffffffff818f24e0 R15: ffff8801bfa8abd0 >> [ 50.795639] FS: 00007f17699ba700(0000) GS:ffff8800023c0000(0000) >> knlGS:0000000000000000 >> [ 50.796810] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >> [ 50.798021] CR2: 0000000000000000 CR3: 00000001bc3e5000 CR4: 00000000000006e0 >> [ 50.799250] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 >> [ 50.800541] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 >> [ 50.801786] Process hald-probe-hidd (pid: 5576, threadinfo >> ffff8801bafe8000, task ffff8801bc3c5dc0) >> [ 50.803057] Stack: >> [ 50.804341] ffff8801bafe9d24 0000000000000000 ffff8801bb155400 >> ffffffff818e2b00 >> [ 50.804378] <0> ffff8801bb0fb850 ffffffff814d9a74 ffff8801bb0fb850 >> ffff8801bb155400 >> [ 50.805709] <0> ffff8801bfdd4900 0000000000000000 ffffffff810daf10 >> ffffffff810db035 >> [ 50.808363] Call Trace: >> [ 50.809664] [<ffffffff814d9a74>] ? usb_open+0xf4/0x1d0 >> [ 50.811008] [<ffffffff810daf10>] ? chrdev_open+0x0/0x210 >> [ 50.812387] [<ffffffff810db035>] ? chrdev_open+0x125/0x210 >> [ 50.813721] [<ffffffff810d5730>] ? __dentry_open.clone.16+0x100/0x320 >> [ 50.815010] [<ffffffff810e3ed0>] ? do_last.clone.45+0x3f0/0x690 >> [ 50.816367] [<ffffffff810e4363>] ? do_filp_open+0x1f3/0x5f0 >> [ 50.817662] [<ffffffff816b90a5>] ? unix_getname+0x65/0xe0 >> [ 50.818947] [<ffffffff81742609>] ? _raw_spin_unlock+0x9/0x40 >> [ 50.820280] [<ffffffff810ef5f4>] ? alloc_fd+0xe4/0x140 >> [ 50.821639] [<ffffffff810d6896>] ? do_sys_open+0x66/0x130 >> [ 50.822931] [<ffffffff810026ab>] ? system_call_fastpath+0x16/0x1b >> [ 50.824283] Code: c0 00 00 48 c7 c2 08 40 de 81 48 c7 c6 38 36 a0 >> 81 e8 d2 8a ac ff 4c 89 a5 18 c0 00 00 48 89 ab c0 00 00 00 48 8b 85 >> 18 c0 00 00 <44> 8b 00 45 85 c0 0f 84 e1 00 00 00 8b 50 04 8d 4a 01 85 >> d2 89 >> [ 50.827599] RIP [<ffffffff8159c4b3>] hiddev_open+0xa3/0x1b0 >> [ 50.829040] RSP <ffff8801bafe9ca8> >> [ 50.830557] CR2: 0000000000000000 >> [ 50.831998] ---[ end trace e966fc680b209e8f ]--- >> >> the first significant related change that catches my eye is: >> >> http://git.eu.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8fe294caf8c868edd9046251824a0af91991bf43 >> HID: fix hiddev's use of usb_find_interface >> >> Could this be the cause ? >> >> @Alex Riesen: >> >> maybe you could try to revert that commit >> (http://git.eu.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=patch;h=8fe294caf8c868edd9046251824a0af91991bf43) >> and see whether that fixes it, I'll do the same in my free time > > Yeah, please let me know whether reverting that commit fixes the problem > you are seeing. It would mean that intfdata is NULL, which'd be a little > bit strange, as it is set in usbhid_probe() already. > > Thanks, > > -- > Jiri Kosina > SUSE Labs, Novell Inc. > Hi Jiri, sorry for the delay :( yeah, it definitely fixes it for me: grepping for BUG or hiddev doesn't show up anything anymore (I rebooted into a kernel without the fglrx so that results wouldn't get falsified) it now only shows: dmesg | grep hiddev[ 2.560945] usbcore: registered new interface driver hiddev [ 8.449492] generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input1 FWIW: I removed the transmitter of the mouse (it's a wireless mouse) and during insert (after the boot was finished) it showed a different error message - perhaps it's useful in tracking down the culprit [I hope that the fglrx-module was loaded doesn't make any change in its usefulness]: [ 130.065747] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0008 [ 130.066025] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s [ 130.170281] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 [ 130.181259] hub 1-1:1.0: port 3 not reset yet, waiting 10ms [ 130.243163] usb 1-1.3: new low speed USB device using ehci_hcd and address 4 [ 130.254993] hub 1-1:1.0: port 3 not reset yet, waiting 10ms [ 130.332878] usb 1-1.3: skipped 1 descriptor after interface [ 130.332884] usb 1-1.3: skipped 1 descriptor after interface [ 130.333438] usb 1-1.3: default language 0x0409 [ 130.335534] usb 1-1.3: udev 4, busnum 1, minor = 3 [ 130.335540] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c521 [ 130.335545] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 130.335550] usb 1-1.3: Product: USB Receiver [ 130.335554] usb 1-1.3: Manufacturer: Logitech [ 130.335709] usb 1-1.3: usb_probe_device [ 130.335716] usb 1-1.3: configuration #1 chosen from 1 choice [ 130.337653] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) [ 130.337761] usbhid 1-1.3:1.0: usb_probe_interface [ 130.337765] usbhid 1-1.3:1.0: usb_probe_interface - got id [ 130.341047] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4 [ 130.341148] usb 1-1.3: link qh8-0e01/ffff8801bf421580 start 4 [1/2 us] [ 130.341261] generic-usb 0003:046D:C521.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input0 [ 130.341303] usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1) [ 130.341373] usbhid 1-1.3:1.1: usb_probe_interface [ 130.341378] usbhid 1-1.3:1.1: usb_probe_interface - got id [ 130.347635] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input5 [ 130.347664] usb 1-1.3: link qh8-0e01/ffff8801bf421900 start 5 [1/2 us] [ 130.347698] drivers/usb/core/file.c: looking for a minor, starting at 0 [ 130.347758] generic-usb 0003:046D:C521.0005: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input1 [ 130.347805] drivers/usb/core/inode.c: creating file '004' [ 130.368286] BUG: unable to handle kernel NULL pointer dereference at (null) [ 130.368288] IP: [<ffffffff8159c4b3>] hiddev_open+0xa3/0x1b0 [ 130.368293] PGD 0 [ 130.368294] Oops: 0000 [#1] PREEMPT SMP [ 130.368295] last sysfs file: /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4/capabilities/sw [ 130.368297] CPU 4 [ 130.368298] Modules linked in: it87 hwmon_vid hwmon fglrx(P) i2c_i801 firewire_ohci firewire_core e1000e wmi shpchp tg3 libphy e1000 scsi_wait_scan sl811_hcd ohci_hcd ssb usb_storage ehci_hcd [ 130.368304] [ 130.368306] Pid: 5776, comm: hald-probe-hidd Tainted: P 2.6.36-rc4_plus_v2+ #2 FMP55/ipower G3710 [ 130.368307] RIP: 0010:[<ffffffff8159c4b3>] [<ffffffff8159c4b3>] hiddev_open+0xa3/0x1b0 [ 130.368310] RSP: 0018:ffff8801bb06fca8 EFLAGS: 00010296 [ 130.368311] RAX: 0000000000000000 RBX: ffff8801baf27400 RCX: 0000000000000004 [ 130.368312] RDX: ffffffff81de4008 RSI: ffffffff81a03638 RDI: ffff8801bb28c030 [ 130.368313] RBP: ffff8801bb280000 R08: ffffea00060f0c08 R09: 0000000000000000 [ 130.368314] R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000 [ 130.368315] R13: 00000000ffffffed R14: ffffffff818f24e0 R15: ffff8801bd1ba1b0 [ 130.368316] FS: 00007f9ba9f78700(0000) GS:ffff880002300000(0000) knlGS:0000000000000000 [ 130.368317] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.368318] CR2: 0000000000000000 CR3: 00000001bad83000 CR4: 00000000000006e0 [ 130.368319] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 130.368320] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 130.368322] Process hald-probe-hidd (pid: 5776, threadinfo ffff8801bb06e000, task ffff8801bafb9770) [ 130.368323] Stack: [ 130.368323] ffff8801bb06fd24 0000000000000000 ffff8801baf27400 ffffffff818e2b00 [ 130.368325] <0> ffff8801bc8e87c0 ffffffff814d9a74 ffff8801bc8e87c0 ffff8801baf27400 [ 130.368327] <0> ffff8801bfdd4900 0000000000000000 ffffffff810daf10 ffffffff810db035 [ 130.368329] Call Trace: [ 130.368332] [<ffffffff814d9a74>] ? usb_open+0xf4/0x1d0 [ 130.368335] [<ffffffff810daf10>] ? chrdev_open+0x0/0x210 [ 130.368336] [<ffffffff810db035>] ? chrdev_open+0x125/0x210 [ 130.368339] [<ffffffff810d5730>] ? __dentry_open.clone.16+0x100/0x320 [ 130.368341] [<ffffffff810e3ed0>] ? do_last.clone.45+0x3f0/0x690 [ 130.368342] [<ffffffff810e4363>] ? do_filp_open+0x1f3/0x5f0 [ 130.368346] [<ffffffff816b90a5>] ? unix_getname+0x65/0xe0 [ 130.368349] [<ffffffff81742609>] ? _raw_spin_unlock+0x9/0x40 [ 130.368352] [<ffffffff810ef5f4>] ? alloc_fd+0xe4/0x140 [ 130.368354] [<ffffffff810d6896>] ? do_sys_open+0x66/0x130 [ 130.368356] [<ffffffff810026ab>] ? system_call_fastpath+0x16/0x1b [ 130.368357] Code: c0 00 00 48 c7 c2 08 40 de 81 48 c7 c6 38 36 a0 81 e8 d2 8a ac ff 4c 89 a5 18 c0 00 00 48 89 ab c0 00 00 00 48 8b 85 18 c0 00 00 <44> 8b 00 45 85 c0 0f 84 e1 00 00 00 8b 50 04 8d 4a 01 85 d2 89 [ 130.368368] RIP [<ffffffff8159c4b3>] hiddev_open+0xa3/0x1b0 [ 130.368370] RSP <ffff8801bb06fca8> [ 130.368370] CR2: 0000000000000000 [ 130.368372] ---[ end trace 56b8e483c48eb892 ]--- Regards & Thanks ! Mat -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
