Re: Regarding USB-to-Serial device driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 13, 2010 at 02:47:45PM +0530, Raju Rameshwar Uprade wrote:
> output of usbmon tell that data going out properly, but it's going in chunks,Ideally It
> should go out in one chunk.I think I have to take care of RTS line. UART drivers works
> in that way,RTS is enabled for complete data out ,then it is disabled so that we can get
> device response.

usb to serial devices are known for sending data in "chunks", that's the
way the devices work (cheap, tiny, 8bit microcontrollers in the device)
and they break things up like this all the time.

If this is an issue, I suggest buying a high-cost usb to serial device
that has a real uart in them and can handle high data rates at constant
speeds.  The I/O devices (now made by digi) do this, and I think a
number of keyspan devices also work well, but it's been a long time
since I tested them.

good luck,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux