Hi, >-----Original Message----- >From: Sergei Shtylyov [mailto:sshtylyov@xxxxxxxxxx] >Sent: Saturday, August 07, 2010 8:55 PM >To: Kalliguddi, Hema >Cc: linux-usb@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; >Mankad, Maulik Ojas; Felipe Balbi; Tony Lindgren; Kevin Hilman >Subject: Re: [PATCH V2 6/8] usb: musb: Offmode fix for idle path > >Hello. > >Hema HK wrote: > >> With OMAP core-off support musb was not functional as >context was getting >> lost after wakeup from core-off. And also musb was blocking >the core-off >> after loading the gadget driver even with no cable connected >sometimes. > >> Added the conext save/restore api in the platform layer which will >> be called in the idle and wakeup path. > >> Changed the usb sysconfig settings as per the usbotg functional spec. >> When the device is not active, configure to force idle and >force standby mode. >> When it is being used, configure in smart standby and smart >idle mode. >> So while attempting to coreoff the usb is configured to >force standby and >> force idle mode, after wakeup configured in smart idle and >smart standby. > >> Signed-off-by: Hema HK <hemahk@xxxxxx> >> Signed-off-by: Maulik Mankad <x0082077@xxxxxx> > >> Cc: Felipe Balbi <felipe.balbi@xxxxxxxxx> >> Cc: Tony Lindgren <tony@xxxxxxxxxxx> >> Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> > >[...] > >> Index: linux-omap-pm/arch/arm/mach-omap2/usb-musb.c >> =================================================================== >> --- linux-omap-pm.orig/arch/arm/mach-omap2/usb-musb.c >2010-08-06 09:24:23.690112596 -0400 >> +++ linux-omap-pm/arch/arm/mach-omap2/usb-musb.c >2010-08-06 10:44:06.385862697 -0400 >> @@ -120,6 +120,27 @@ >> } >> } >> >> +void musb_context_save_restore(int save) >> +{ >> + struct omap_hwmod *oh = omap_hwmod_lookup("usb_otg_hs"); >> + struct omap_device *od = oh->od; >> + struct platform_device *pdev = &od->pdev; >> + struct device *dev = &pdev->dev; >> + struct device_driver *drv = dev->driver; >> + >> + if (drv) { >> + struct musb_hdrc_platform_data *pdata = >dev->platform_data; >> + const struct dev_pm_ops *pm = drv->pm; > > Should be an empty line after the declaration block... Ok. > >> + if (!pdata->is_usb_active(dev)) { >> + >> + if (save) >> + pm->suspend(dev); >> + else >> + pm->resume_noirq(dev); >> + } >> + } >> +} >> + >> #else >> void __init usb_musb_init(struct omap_musb_board_data *board_data) >> { >> Index: linux-omap-pm/drivers/usb/musb/musb_core.c >> =================================================================== >> --- linux-omap-pm.orig/drivers/usb/musb/musb_core.c >2010-08-06 09:24:21.069863329 -0400 >> +++ linux-omap-pm/drivers/usb/musb/musb_core.c >2010-08-06 10:44:06.369863527 -0400 >> @@ -2427,11 +2427,6 @@ >> } >> >> musb_save_context(musb); >> - >> - if (musb->set_clock) >> - musb->set_clock(musb->clock, 0); >> - else >> - clk_disable(musb->clock); >> spin_unlock_irqrestore(&musb->lock, flags); >> return 0; >> } >> @@ -2443,12 +2438,6 @@ >> >> if (!musb->clock) >> return 0; >> - >> - if (musb->set_clock) >> - musb->set_clock(musb->clock, 1); >> - else >> - clk_enable(musb->clock); >> - >> musb_restore_context(musb); > > The same question again: are you sure that clocks are auto-gated on >non-OMAP platfroms? Bon Lui confirmed that there is no clock for blackfin. > >> Index: linux-omap-pm/drivers/usb/musb/omap2430.c >> =================================================================== >> --- linux-omap-pm.orig/drivers/usb/musb/omap2430.c >2010-08-06 09:24:21.069863329 -0400 >> +++ linux-omap-pm/drivers/usb/musb/omap2430.c >2010-08-06 10:44:30.093914217 -0400 >[...] >> @@ -259,15 +273,42 @@ >> void musb_platform_save_context(struct musb *musb, >> struct musb_context_registers *musb_context) >> { >> - musb_context->otg_sysconfig = musb_readl(musb->mregs, >OTG_SYSCONFIG); >> - musb_context->otg_forcestandby = >musb_readl(musb->mregs, OTG_FORCESTDBY); > > If you're not saving the registers, you should remove the >corresponding >fields from 'struct musb_context_registers'. Agreed. I will remove them from the structure. >> + /* >> + * As per the omap-usbotg specification, configure it >to forced standby >> + * and force idle mode when no activity on usb. >> + */ >> + void __iomem *musb_base = musb->mregs; >> + >> + musb_writel(musb_base, OTG_FORCESTDBY, 0); >> + >> + musb_writel(musb_base, OTG_SYSCONFIG, musb_readl(musb_base, >> + OTG_SYSCONFIG) & ~(NOSTDBY | >SMARTSTDBY)); >> + >> + musb_writel(musb_base, OTG_SYSCONFIG, musb_readl(musb_base, >> + OTG_SYSCONFIG) & ~(AUTOIDLE)); > > Pointless parens around AUTOIDLE... Ok. I will remove. > >> + musb_writel(musb_base, OTG_SYSCONFIG, musb_readl(musb_base, >> + OTG_SYSCONFIG) & ~(NOIDLE | SMARTIDLE)); >> + >> + musb_writel(musb_base, OTG_FORCESTDBY, 1); >> } >> >> void musb_platform_restore_context(struct musb *musb, >> struct musb_context_registers *musb_context) >> { >> - musb_writel(musb->mregs, OTG_SYSCONFIG, >musb_context->otg_sysconfig); >> - musb_writel(musb->mregs, OTG_FORCESTDBY, >musb_context->otg_forcestandby); >> + /* >> + * As per the omap-usbotg specification, configure it >smart standby >> + * and smart idle during operation. >> + */ >> + void __iomem *musb_base = musb->mregs; >> + >> + musb_writel(musb_base, OTG_FORCESTDBY, 0); >> + >> + musb_writel(musb_base, OTG_SYSCONFIG, musb_readl(musb_base, >> + OTG_SYSCONFIG) | (SMARTSTDBY)); > > Pointless parens around SMARTSTDBY... Ok. I will remove. > >> + musb_writel(musb_base, OTG_SYSCONFIG, musb_readl(musb_base, >> + OTG_SYSCONFIG) | (SMARTIDLE)); > > Pointless parens around SMARTIDLE... Ok. I will remove. > >WBR, Sergei > >-- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
