This series of 3 patches is part of enabling usb gadget on freescale mx51 babbage hw. PATCH 1/3 There is a conditional if statement for the usb clock to be 60MHz +/-1kHz in the mxc gadget driver, this requirement is not needed on mx51 because the usb core is clocked at 66.5MHz or any other frequency that are not multiples of 60MHz. PATCH 2/3 PLL3 can be used for TVE output and/or USB. No need to turn on a whole PLL just for USB. Using PLL2 is a better source for the usb clock. PATCH 3/3 Defines device structure for gadget on OTG port and registers it in the board file. Defines the appropriate clock. Defines KCONFIG option for enabling OTG port for EHCI or Gadget. Conditionalizes the OTG port for EHCI or Gadget feature. git diff --stat for all 3 patches: arch/arm/mach-mx5/board-mx51_babbage.c | 11 +++++++++++ arch/arm/mach-mx5/clock-mx51.c | 4 +++- arch/arm/mach-mx5/devices.c | 12 ++++++++++++ arch/arm/mach-mx5/devices.h | 1 + drivers/usb/gadget/fsl_mx3_udc.c | 14 ++++++++------ drivers/usb/host/Kconfig | 8 ++++++++ 6 files changed, 43 insertions(+), 7 deletions(-) Thanks, Dinh Nguyen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
