Add framebuffer support to PicoLCD device with use of deferred-io.
Only changed areas of framebuffer get sent to device in order to
save USB bandwidth and especially resources on PicoLCD device or
allow higher refresh rate for a small area. Changed tiles are
determined while updating shadow framebuffer.
Changes since v4:
- make backbuffer inconsistent with framebuffer to force refresh
in picolcd_fb_reset (e.g. for reset_resume)
- force picolcd_fb_update() to wait for urbs to get out of the queue
when it sends more than 1/2 queue worth as a full display refresh
fills the whole queue eventually causing queue overrun (and lost
report) on a quick system
Changes since v3:
- document fb_update_rate sysfs attribute
- change fb_update_rate read behavior to match enum with selected
in brackets presentation
Changes since v2:
- add 8bit grayscale depth as near to no userspace app handles 1bit
- properly send whole framebuffer on reset/init
- drop inline keywords from non-stub functions
- use device_{create,remove}_file instead of sysfs_{create,remove}_file
Signed-off-by: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
---
Because on a quick system I get "output queue full" messages (and
incomplete update of device's display) when a full framebuffer has to
be transmitted back to PicoLCD device I have to wait on the queue to
get a few reports out.
Instead of duplicating "usbhid_wait_io()" I marked it with EXPORT_SYMBOL_GPL
so I can still build hid-picolcd as a module.
Documentation/ABI/testing/sysfs-driver-hid-picolcd | 17 +
drivers/hid/Kconfig | 7 +-
drivers/hid/hid-picolcd.c | 570 +++++++++++++++++++-
drivers/hid/usbhid/hid-core.c | 1 +
4 files changed, 593 insertions(+), 2 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
index 6fb4f21..14f52d7 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-picolcd
+++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -15,3 +15,20 @@ Description: Make it possible to switch the PicoLCD device between LCD
disconnected and reconnects after above delay (default value
is 5 seconds though this default should not be relied on).
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
+Date: March 2010
+Contact: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
+Description: Make it possible to adjust defio refresh rate.
+
+ Reading: returns list of available refresh rates (expressed in Hz),
+ the active refresh rate being enclosed in brackets ('[' and ']')
+
+ Writing: accepts new refresh rate expressed in integer Hz
+ within permitted rates.
+
+ Note: As device can barely do 2 complete refreshes a second
+ it only makes sense to adjust this value if only one or two
+ tiles get changed and it's not appropriate to expect the application
+ to flush it's tiny changes explicitely at higher than default rate.
+
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 138ba6a..a813ea9 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -265,6 +265,11 @@ config HID_PETALYNX
config HID_PICOLCD
tristate "PicoLCD (graphic version)"
depends on USB_HID
+ select FB_DEFERRED_IO if FB
+ select FB_SYS_FILLRECT if FB
+ select FB_SYS_COPYAREA if FB
+ select FB_SYS_IMAGEBLIT if FB
+ select FB_SYS_FOPS if FB
---help---
This provides support for Minibox PicoLCD devices, currently
only the graphical ones are supported.
@@ -272,8 +277,8 @@ config HID_PICOLCD
This includes support for the following device features:
- Keypad
- Switching between Firmware and Flash mode
- Features that are not (yet) supported:
- Framebuffer for monochrome 256x64 display
+ Features that are not (yet) supported:
- Backlight control
- Contrast control
- IR
diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c
index 28f8ea0..efc4bc8 100644
--- a/drivers/hid/hid-picolcd.c
+++ b/drivers/hid/hid-picolcd.c
@@ -24,6 +24,9 @@
#include "usbhid/usbhid.h"
#include <linux/usb.h>
+#include <linux/fb.h>
+#include <linux/vmalloc.h>
+
#include <linux/seq_file.h>
#include <linux/debugfs.h>
@@ -69,6 +72,59 @@
#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */
#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */
+#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
+/* Framebuffer
+ *
+ * The PicoLCD use a Topway LCD module of 256x64 pixel
+ * This display area is tiled over 4 controllers with 8 tiles
+ * each. Each tile has 8x64 pixel, each data byte representing
+ * a 1-bit wide vertical line of the tile.
+ *
+ * The display can be updated at a tile granularity.
+ *
+ * Chip 1 Chip 2 Chip 3 Chip 4
+ * +----------------+----------------+----------------+----------------+
+ * | Tile 1 | Tile 1 | Tile 1 | Tile 1 |
+ * +----------------+----------------+----------------+----------------+
+ * | Tile 2 | Tile 2 | Tile 2 | Tile 2 |
+ * +----------------+----------------+----------------+----------------+
+ * ...
+ * +----------------+----------------+----------------+----------------+
+ * | Tile 8 | Tile 8 | Tile 8 | Tile 8 |
+ * +----------------+----------------+----------------+----------------+
+ */
+#define PICOLCDFB_NAME "picolcdfb"
+#define PICOLCDFB_WIDTH (256)
+#define PICOLCDFB_HEIGHT (64)
+#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8)
+
+#define PICOLCDFB_UPDATE_RATE_LIMIT 10
+#define PICOLCDFB_UPDATE_RATE_DEFAULT 2
+
+/* Framebuffer visual structures */
+static const struct fb_fix_screeninfo picolcdfb_fix = {
+ .id = PICOLCDFB_NAME,
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_MONO01,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .line_length = PICOLCDFB_WIDTH / 8,
+ .accel = FB_ACCEL_NONE,
+};
+
+static const struct fb_var_screeninfo picolcdfb_var = {
+ .xres = PICOLCDFB_WIDTH,
+ .yres = PICOLCDFB_HEIGHT,
+ .xres_virtual = PICOLCDFB_WIDTH,
+ .yres_virtual = PICOLCDFB_HEIGHT,
+ .width = 103,
+ .height = 26,
+ .bits_per_pixel = 1,
+ .grayscale = 1,
+};
+#endif /* CONFIG_FB */
+
/* Input device
*
* The PicoLCD has an IR receiver header, a built-in keypad with 5 keys
@@ -118,6 +174,16 @@ struct picolcd_data {
struct input_dev *input_cir;
unsigned short keycode[PICOLCD_KEYS];
+#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
+ /* Framebuffer stuff */
+ u8 fb_update_rate;
+ u8 fb_bpp;
+ u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */
+ u8 *fb_bitmap; /* framebuffer */
+ struct fb_info *fb_info;
+ struct fb_deferred_io fb_defio;
+#endif /* CONFIG_FB */
+
/* Housekeeping stuff */
spinlock_t lock;
struct mutex mutex;
@@ -125,6 +191,7 @@ struct picolcd_data {
int status;
#define PICOLCD_BOOTLOADER 1
#define PICOLCD_FAILED 2
+#define PICOLCD_READY_FB 4
};
@@ -197,6 +264,486 @@ static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev,
return work;
}
+#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
+/* Send a given tile to PicoLCD */
+static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile)
+{
+ struct picolcd_data *data = hid_get_drvdata(hdev);
+ struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev);
+ struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev);
+ unsigned long flags;
+ u8 *tdata;
+ int i;
+
+ if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1)
+ return -ENODEV;
+
+ spin_lock_irqsave(&data->lock, flags);
+ hid_set_field(report1->field[0], 0, chip << 2);
+ hid_set_field(report1->field[0], 1, 0x02);
+ hid_set_field(report1->field[0], 2, 0x00);
+ hid_set_field(report1->field[0], 3, 0x00);
+ hid_set_field(report1->field[0], 4, 0xb8 | tile);
+ hid_set_field(report1->field[0], 5, 0x00);
+ hid_set_field(report1->field[0], 6, 0x00);
+ hid_set_field(report1->field[0], 7, 0x40);
+ hid_set_field(report1->field[0], 8, 0x00);
+ hid_set_field(report1->field[0], 9, 0x00);
+ hid_set_field(report1->field[0], 10, 32);
+
+ hid_set_field(report2->field[0], 0, (chip << 2) | 0x01);
+ hid_set_field(report2->field[0], 1, 0x00);
+ hid_set_field(report2->field[0], 2, 0x00);
+ hid_set_field(report2->field[0], 3, 32);
+
+ tdata = data->fb_vbitmap + (tile * 4 + chip) * 64;
+ for (i = 0; i < 64; i++)
+ if (i < 32)
+ hid_set_field(report1->field[0], 11 + i, tdata[i]);
+ else
+ hid_set_field(report2->field[0], 4 + i - 32, tdata[i]);
+
+ usbhid_submit_report(data->hdev, report1, USB_DIR_OUT);
+ usbhid_submit_report(data->hdev, report2, USB_DIR_OUT);
+ spin_unlock_irqrestore(&data->lock, flags);
+ return 0;
+}
+
+/* Translate a single tile*/
+static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp,
+ int chip, int tile)
+{
+ int i, b, changed = 0;
+ u8 tdata[64];
+ u8 *vdata = vbitmap + (tile * 4 + chip) * 64;
+
+ if (bpp == 1) {
+ for (b = 7; b >= 0; b--) {
+ const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32;
+ for (i = 0; i < 64; i++) {
+ tdata[i] <<= 1;
+ tdata[i] |= (bdata[i/8] >> (7 - i % 8)) & 0x01;
+ }
+ }
+ } else if (bpp == 8) {
+ for (b = 7; b >= 0; b--) {
+ const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8;
+ for (i = 0; i < 64; i++) {
+ tdata[i] <<= 1;
+ tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00;
+ }
+ }
+ } else {
+ /* Oops, we should never get here! */
+ WARN_ON(1);
+ return 0;
+ }
+
+ for (i = 0; i < 64; i++)
+ if (tdata[i] != vdata[i]) {
+ changed = 1;
+ vdata[i] = tdata[i];
+ }
+ return changed;
+}
+
+/* Reconfigure LCD display */
+static int picolcd_fb_reset(struct picolcd_data *data, int clear)
+{
+ struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev);
+ int i, j;
+ unsigned long flags;
+ static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 };
+
+ if (!report || report->maxfield != 1)
+ return -ENODEV;
+
+ spin_lock_irqsave(&data->lock, flags);
+ for (i = 0; i < 4; i++) {
+ for (j = 0; j < report->field[0]->maxusage; j++)
+ if (j == 0)
+ hid_set_field(report->field[0], j, i << 2);
+ else if (j < sizeof(mapcmd))
+ hid_set_field(report->field[0], j, mapcmd[j]);
+ else
+ hid_set_field(report->field[0], j, 0);
+ usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
+ }
+
+ data->status |= PICOLCD_READY_FB;
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ if (data->fb_bitmap) {
+ if (clear) {
+ memset(data->fb_vbitmap, 0xff, PICOLCDFB_SIZE);
+ memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp);
+ } else {
+ /* invert 1 byte in each tile to force resend */
+ for (i = 0; i < PICOLCDFB_SIZE; i+=64)
+ data->fb_vbitmap[i] = ~data->fb_vbitmap[i];
+ }
+ }
+
+ /* schedule first output of framebuffer */
+ if (data->fb_info)
+ schedule_delayed_work(&data->fb_info->deferred_work, 0);
+
+ return 0;
+}
+
+/* Update fb_vbitmap from the screen_base and send changed tiles to device */
+static void picolcd_fb_update(struct picolcd_data *data)
+{
+ int chip, tile, n;
+ unsigned long flags;
+
+ spin_lock_irqsave(&data->lock, flags);
+ if (!(data->status & PICOLCD_READY_FB)) {
+ spin_unlock_irqrestore(&data->lock, flags);
+ picolcd_fb_reset(data, 0);
+ } else {
+ spin_unlock_irqrestore(&data->lock, flags);
+ }
+
+ /*
+ * Translate the framebuffer into the format needed by the PicoLCD.
+ * See display layout above.
+ * Do this one tile after the other and push those tiles that changed.
+ *
+ * Wait for our IO to complete as otherwise we might flood the queue!
+ */
+ n = 0;
+ for (chip = 0; chip < 4; chip++)
+ for (tile = 0; tile < 8; tile++)
+ if (picolcd_fb_update_tile(data->fb_vbitmap,
+ data->fb_bitmap, data->fb_bpp, chip, tile)) {
+ n += 2;
+ if (n >= HID_OUTPUT_FIFO_SIZE / 2) {
+ usbhid_wait_io(data->hdev);
+ n = 0;
+ }
+ picolcd_fb_send_tile(data->hdev, chip, tile);
+ }
+ if (n)
+ usbhid_wait_io(data->hdev);
+}
+
+/* Stub to call the system default and update the image on the picoLCD */
+static void picolcd_fb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ if (!info->par)
+ return;
+ sys_fillrect(info, rect);
+
+ schedule_delayed_work(&info->deferred_work, 0);
+}
+
+/* Stub to call the system default and update the image on the picoLCD */
+static void picolcd_fb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ if (!info->par)
+ return;
+ sys_copyarea(info, area);
+
+ schedule_delayed_work(&info->deferred_work, 0);
+}
+
+/* Stub to call the system default and update the image on the picoLCD */
+static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ if (!info->par)
+ return;
+ sys_imageblit(info, image);
+
+ schedule_delayed_work(&info->deferred_work, 0);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t ret;
+ if (!info->par)
+ return -ENODEV;
+ ret = fb_sys_write(info, buf, count, ppos);
+ if (ret >= 0)
+ schedule_delayed_work(&info->deferred_work, 0);
+ return ret;
+}
+
+static int picolcd_fb_blank(int blank, struct fb_info *info)
+{
+ if (!info->par)
+ return -ENODEV;
+ /* We let fb notification do this for us via lcd/backlight device */
+ return 0;
+}
+
+static void picolcd_fb_destroy(struct fb_info *info)
+{
+ struct picolcd_data *data = info->par;
+ info->par = NULL;
+ if (data)
+ data->fb_info = NULL;
+ fb_deferred_io_cleanup(info);
+ framebuffer_release(info);
+}
+
+static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ __u32 bpp = var->bits_per_pixel;
+ __u32 activate = var->activate;
+
+ /* only allow 1/8 bit depth (8-bit is grayscale) */
+ *var = picolcdfb_var;
+ var->activate = activate;
+ if (bpp >= 8)
+ var->bits_per_pixel = 8;
+ else
+ var->bits_per_pixel = 1;
+ return 0;
+}
+
+static int picolcd_set_par(struct fb_info *info)
+{
+ struct picolcd_data *data = info->par;
+ u8 *o_fb, *n_fb;
+ if (info->var.bits_per_pixel == data->fb_bpp)
+ return 0;
+ /* switch between 1/8 bit depths */
+ if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8)
+ return -EINVAL;
+
+ o_fb = data->fb_bitmap;
+ n_fb = vmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel);
+ if (!n_fb)
+ return -ENOMEM;
+
+ fb_deferred_io_cleanup(info);
+ /* translate FB content to new bits-per-pixel */
+ if (info->var.bits_per_pixel == 1) {
+ int i, b;
+ for (i = 0; i < PICOLCDFB_SIZE; i++) {
+ u8 p = 0;
+ for (b = 0; b < 8; b++) {
+ p <<= 1;
+ p |= o_fb[i*8+b] ? 0x01 : 0x00;
+ }
+ }
+ info->fix.visual = FB_VISUAL_MONO01;
+ info->fix.line_length = PICOLCDFB_WIDTH / 8;
+ } else {
+ int i;
+ for (i = 0; i < PICOLCDFB_SIZE * 8; i++)
+ n_fb[i] = o_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.line_length = PICOLCDFB_WIDTH;
+ }
+
+ data->fb_bitmap = n_fb;
+ data->fb_bpp = info->var.bits_per_pixel;
+ info->screen_base = (char __force __iomem *)n_fb;
+ info->fix.smem_start = (unsigned long)n_fb;
+ info->fix.smem_len = PICOLCDFB_SIZE*data->fb_bpp;
+ fb_deferred_io_init(info);
+ vfree(o_fb);
+ return 0;
+}
+
+/* Note this can't be const because of struct fb_info definition */
+static struct fb_ops picolcdfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_destroy = picolcd_fb_destroy,
+ .fb_read = fb_sys_read,
+ .fb_write = picolcd_fb_write,
+ .fb_blank = picolcd_fb_blank,
+ .fb_fillrect = picolcd_fb_fillrect,
+ .fb_copyarea = picolcd_fb_copyarea,
+ .fb_imageblit = picolcd_fb_imageblit,
+ .fb_check_var = picolcd_fb_check_var,
+ .fb_set_par = picolcd_set_par,
+};
+
+
+/* Callback from deferred IO workqueue */
+static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist)
+{
+ picolcd_fb_update(info->par);
+}
+
+static const struct fb_deferred_io picolcd_fb_defio = {
+ .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT,
+ .deferred_io = picolcd_fb_deferred_io,
+};
+
+
+/*
+ * The "fb_update_rate" sysfs attribute
+ */
+static ssize_t picolcd_fb_update_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct picolcd_data *data = dev_get_drvdata(dev);
+ unsigned i, fb_update_rate = data->fb_update_rate;
+ size_t ret = 0;
+
+ for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++)
+ if (ret >= PAGE_SIZE)
+ break;
+ else if (i == fb_update_rate)
+ ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i);
+ else
+ ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i);
+ if (ret > 0)
+ buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n';
+ return ret;
+}
+
+static ssize_t picolcd_fb_update_rate_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct picolcd_data *data = dev_get_drvdata(dev);
+ int i;
+ unsigned u;
+
+ if (count < 1 || count > 10)
+ return -EINVAL;
+
+ i = sscanf(buf, "%u", &u);
+ if (i != 1)
+ return -EINVAL;
+
+ if (u > PICOLCDFB_UPDATE_RATE_LIMIT)
+ return -ERANGE;
+ else if (u == 0)
+ u = PICOLCDFB_UPDATE_RATE_DEFAULT;
+
+ data->fb_update_rate = u;
+ data->fb_defio.delay = HZ / data->fb_update_rate;
+ return count;
+}
+
+static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show,
+ picolcd_fb_update_rate_store);
+
+/* initialize Framebuffer device */
+static int picolcd_init_framebuffer(struct picolcd_data *data)
+{
+ struct device *dev = &data->hdev->dev;
+ struct fb_info *info = NULL;
+ int error = -ENOMEM;
+ u8 *fb_vbitmap = NULL;
+ u8 *fb_bitmap = NULL;
+
+ fb_bitmap = vmalloc(PICOLCDFB_SIZE*picolcdfb_var.bits_per_pixel);
+ if (fb_bitmap == NULL) {
+ dev_err(dev, "can't get a free page for framebuffer\n");
+ goto err_nomem;
+ }
+
+ fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL);
+ if (fb_vbitmap == NULL) {
+ dev_err(dev, "can't alloc vbitmap image buffer\n");
+ goto err_nomem;
+ }
+
+ data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT;
+ data->fb_defio = picolcd_fb_defio;
+ info = framebuffer_alloc(0, dev);
+ if (info == NULL) {
+ dev_err(dev, "failed to allocate a framebuffer\n");
+ goto err_nomem;
+ }
+
+ info->fbdefio = &data->fb_defio;
+ info->screen_base = (char __force __iomem *)fb_bitmap;
+ info->fbops = &picolcdfb_ops;
+ info->var = picolcdfb_var;
+ info->fix = picolcdfb_fix;
+ info->fix.smem_len = PICOLCDFB_SIZE;
+ info->fix.smem_start = (unsigned long)fb_bitmap;
+ info->par = data;
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ data->fb_vbitmap = fb_vbitmap;
+ data->fb_bitmap = fb_bitmap;
+ data->fb_bpp = picolcdfb_var.bits_per_pixel;
+ error = picolcd_fb_reset(data, 1);
+ if (error) {
+ dev_err(dev, "failed to configure display\n");
+ goto err_cleanup;
+ }
+ error = device_create_file(dev, &dev_attr_fb_update_rate);
+ if (error) {
+ dev_err(dev, "failed to create sysfs attributes\n");
+ goto err_cleanup;
+ }
+ data->fb_info = info;
+ error = register_framebuffer(info);
+ if (error) {
+ dev_err(dev, "failed to register framebuffer\n");
+ goto err_sysfs;
+ }
+ fb_deferred_io_init(info);
+ /* schedule first output of framebuffer */
+ schedule_delayed_work(&info->deferred_work, 0);
+ return 0;
+
+err_sysfs:
+ device_remove_file(dev, &dev_attr_fb_update_rate);
+err_cleanup:
+ data->fb_vbitmap = NULL;
+ data->fb_bitmap = NULL;
+ data->fb_bpp = 0;
+ data->fb_info = NULL;
+
+err_nomem:
+ framebuffer_release(info);
+ vfree(fb_bitmap);
+ kfree(fb_vbitmap);
+ return error;
+}
+
+static void picolcd_exit_framebuffer(struct picolcd_data *data)
+{
+ struct fb_info *info = data->fb_info;
+ u8 *fb_vbitmap = data->fb_vbitmap;
+ u8 *fb_bitmap = data->fb_bitmap;
+
+ if (!info)
+ return;
+
+ data->fb_vbitmap = NULL;
+ data->fb_bitmap = NULL;
+ data->fb_bpp = 0;
+ data->fb_info = NULL;
+ device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate);
+ fb_deferred_io_cleanup(info);
+ unregister_framebuffer(info);
+ vfree(fb_bitmap);
+ kfree(fb_vbitmap);
+}
+
+
+#else
+static inline int picolcd_fb_reset(struct picolcd_data *data, int clear)
+{
+ return 0;
+}
+static inline int picolcd_init_framebuffer(struct picolcd_data *data)
+{
+ return 0;
+}
+static void picolcd_exit_framebuffer(struct picolcd_data *data)
+{
+}
+#endif /* CONFIG_FB */
+
/*
* input class device
*/
@@ -314,6 +861,7 @@ static int picolcd_reset(struct hid_device *hdev)
struct picolcd_data *data = hid_get_drvdata(hdev);
struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev);
unsigned long flags;
+ int error;
if (!data || !report || report->maxfield != 1)
return -ENODEV;
@@ -327,7 +875,16 @@ static int picolcd_reset(struct hid_device *hdev)
usbhid_submit_report(hdev, report, USB_DIR_OUT);
spin_unlock_irqrestore(&data->lock, flags);
- return picolcd_check_version(hdev);
+ error = picolcd_check_version(hdev);
+ if (error)
+ return error;
+
+#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
+ if (data->fb_info)
+ schedule_delayed_work(&data->fb_info->deferred_work, 0);
+#endif /* CONFIG_FB */
+
+ return 0;
}
/*
@@ -931,6 +1488,9 @@ static int picolcd_reset_resume(struct hid_device *hdev)
ret = picolcd_reset(hdev);
if (ret)
dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret);
+ ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0);
+ if (ret)
+ dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret);
return 0;
}
#endif
@@ -1027,6 +1587,11 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data)
if (error)
goto err;
+ /* Set up the framebuffer device */
+ error = picolcd_init_framebuffer(data);
+ if (error)
+ goto err;
+
#ifdef CONFIG_DEBUG_FS
report = picolcd_out_report(REPORT_READ_MEMORY, hdev);
if (report && report->maxfield == 1 && report->field[0]->report_size == 8)
@@ -1036,6 +1601,7 @@ static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data)
#endif
return 0;
err:
+ picolcd_exit_framebuffer(data);
picolcd_exit_cir(data);
picolcd_exit_keys(data);
return error;
@@ -1165,6 +1731,8 @@ static void picolcd_remove(struct hid_device *hdev)
complete(&data->pending->ready);
spin_unlock_irqrestore(&data->lock, flags);
+ /* Clean up the framebuffer */
+ picolcd_exit_framebuffer(data);
/* Cleanup input */
picolcd_exit_cir(data);
picolcd_exit_keys(data);
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 39fe2e8..9acf573 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -623,6 +623,7 @@ int usbhid_wait_io(struct hid_device *hid)
return 0;
}
+EXPORT_SYMBOL_GPL(usbhid_wait_io);
static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
{
--
1.6.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
