Re: 2.6.33: Xorg+khubd lockup (D-state) BUG / ioctl EVIOCGNAME failed: Inappropriate ioctl for device / PreInit returned NULL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Thu, 25 Mar 2010, Alan Stern wrote:

Please don't call it an "oops".  It's not; it's just an informational
message.
Ok.

It does look like there's a problem with one of the USB host
controllers.  Does the dmesg log show anything when the mouse and
It must be the chipset because it did affect the other person's host too.

keyboard stop working (as opposed to 120 seconds later)?
Hi, I did not see anything else in the kernel log when it stopped.

Here is the kernel log:
[ 4.853144] Adding 4008176k swap on /dev/sda1. Priority:-1 extents:1 across:4008176k [ 4.885030] usb 2-5: New USB device found, idVendor=413c, idProduct=2005
[    4.885092] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.885145] usb 2-5: Product: DELL USB Keyboard
[    4.885197] usb 2-5: Manufacturer: DELL
[    4.911127] usbcore: registered new interface driver hiddev
[    4.917473] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/input/input7
[    4.917592] generic-usb 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:0b.0-5/input0
[    4.917674] usbcore: registered new interface driver usbhid
[    4.917727] usbhid: USB HID core driver
[    5.105278] usb 2-6: new low speed USB device using ohci_hcd and address 3
[    5.251029] usb 2-6: New USB device found, idVendor=046d, idProduct=c018
[    5.251091] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.251144] usb 2-6: Product: USB Optical Mouse
[    5.251193] usb 2-6: Manufacturer: Logitech
[    5.261426] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.0/input/input8
[    5.261555] generic-usb 0003:046D:C018.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0b.0-6/input0
[    5.911624] tg3 0000:02:00.0: irq 28 for MSI/MSI-X
[    9.144766] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[    9.144829] tg3: eth0: Flow control is off for TX and off for RX.

At this point its still hung.

What does /sys/kernel/debug/usb/devices contain?  (You'll probably have
to look at it _before_ the problem occurs.)
Rebooting and will paste this.  Ok, rebooted, here is the output:

# cat /sys/kernel/debug/usb/devices

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 8
B:  Alloc= 26/900 us ( 3%), #Int=  2, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 2.06
S:  Manufacturer=Linux 2.6.33 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:0b.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=413c ProdID=2005 Rev= 1.05
S:  Manufacturer=DELL
S:  Product=DELL USB Keyboard
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms

T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  3 Spd=1.5 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c018 Rev=43.01
S:  Manufacturer=Logitech
S:  Product=USB Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   5 Ivl=10ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.33 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:0b.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms


Suppose you don't run X at all.  Do the mouse and keyboard eventually
stop working even then?
I have not tried that, the reason I use the host locally is for X.


Justin.

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux