From: Mike Frysinger <vapier@xxxxxxxxxx>
The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY.
However, it has no ULPI support - so there are no registers at all.
That means accesses to ULPI_BUSCONTROL have to be abstracted away
like other MUSB registers.
This fixes building for Blackfin parts again.
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
Acked-by: Anand Gadiyar <gadiyar@xxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
drivers/usb/musb/musb_core.c | 5 ++---
drivers/usb/musb/musb_regs.h | 19 +++++++++++++++++++
2 files changed, 21 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 5487019..4c0f5e1 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2005,7 +2005,6 @@ bad_config:
/* host side needs more setup */
if (is_host_enabled(musb)) {
struct usb_hcd *hcd = musb_to_hcd(musb);
- u8 busctl;
otg_set_host(musb->xceiv, &hcd->self);
@@ -2016,9 +2015,9 @@ bad_config:
/* program PHY to use external vBus if required */
if (plat->extvbus) {
- busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL);
+ u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
busctl |= MUSB_ULPI_USE_EXTVBUS;
- musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
+ musb_write_ulpi_buscontrol(musb->mregs, busctl);
}
}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 292894a..14c9700 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -326,6 +326,11 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
musb_writew(mbase, MUSB_RXFIFOADD, c_off);
}
+static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
+{
+ musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
+}
+
static inline u8 musb_read_txfifosz(void __iomem *mbase)
{
return musb_readb(mbase, MUSB_TXFIFOSZ);
@@ -346,6 +351,11 @@ static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
return musb_readw(mbase, MUSB_RXFIFOADD);
}
+static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
+{
+ return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
+}
+
static inline u8 musb_read_configdata(void __iomem *mbase)
{
musb_writeb(mbase, MUSB_INDEX, 0);
@@ -510,6 +520,10 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
{
}
+static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
+{
+}
+
static inline u8 musb_read_txfifosz(void __iomem *mbase)
{
}
@@ -526,6 +540,11 @@ static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
{
}
+static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
+{
+ return 0;
+}
+
static inline u8 musb_read_configdata(void __iomem *mbase)
{
return 0;
--
1.7.0.rc0.33.g7c3932
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
