On Mon, Mar 08, 2010 at 09:39:31AM +0900, Murali K. Vemuri wrote: > Hi, > I am using linux kernel 2.6.19 ported onto a proprietary hardware. > I am connecting a USB Modem that is being recognized by the driver as : > "storage card". > > I did "cat /proc/bus/usb/devices" to find the information about the > driver and found these lines: > > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > Driver=usb-storage seems like this mode first shows up and a mass storage device to provide the installation driver, after the driver is installed, that would issue a specific message for the device to disconnect and show up as a real device. there were already questions like this before and I believe there's some quirk on usb-storage module for handling that. On the other hand, why 2.6.19 ?? try with a newer kernel. -- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
