From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
On various mxc boards, the intial ULPI reads resulted in a timeout
which prevented the transceiver to be identified and thus the ehci
device to be probed.
Initializing the hardware lines connected to the transceiver (through
pdata->init call) before actually enabling clocks and configuring
registers in the devices fixes this problem.
Signed-off-by: Valentin Longchamp <valentin.longchamp@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/host/ehci-mxc.c | 23 +++++++++++------------
1 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 35c56f4..23cd917 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -162,6 +162,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
goto err_ioremap;
}
+ /* call platform specific init function */
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret) {
+ dev_err(dev, "platform init failed\n");
+ goto err_init;
+ }
+ /* platforms need some time to settle changed IO settings */
+ mdelay(10);
+ }
+
/* enable clocks */
priv->usbclk = clk_get(dev, "usb");
if (IS_ERR(priv->usbclk)) {
@@ -192,18 +203,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
if (ret < 0)
goto err_init;
- /* call platform specific init function */
- if (pdata->init) {
- ret = pdata->init(pdev);
- if (ret) {
- dev_err(dev, "platform init failed\n");
- goto err_init;
- }
- }
-
- /* most platforms need some time to settle changed IO settings */
- mdelay(10);
-
/* Initialize the transceiver */
if (pdata->otg) {
pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
