From: Bryan Wu <cooloney@xxxxxxxxxx>
Normally, the musb uses ep1 as the bidirectional bulk endpoint. This won't
work on the Blackfin musb as all endpoints (except ep0) are unidirectional.
Further, ep1-ep4 have a small 128 byte FIFO which makes them undesirable
for bulk endpoints (which need more like a 512 byte FIFO). This leaves us
with ep5-ep7 which have 1024 byte FIFOs and can be configured as either
in/out and bulk/interrupt/iso on the fly.
Signed-off-by: Bryan Wu <cooloney@xxxxxxxxxx>
Signed-off-by: Cliff Cai <cliff.cai@xxxxxxxxxx>
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/gadget/epautoconf.c | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index cd0914e..4671d5d 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -275,6 +275,20 @@ struct usb_ep * __init usb_ep_autoconfig (
ep = find_ep (gadget, "ep1-bulk");
if (ep && ep_matches (gadget, ep, desc))
return ep;
+
+#ifdef CONFIG_BLACKFIN
+ } else if (gadget_is_musbhsfc(gadget) || gadget_is_musbhdrc(gadget)) {
+ if ((USB_ENDPOINT_XFER_BULK == type) ||
+ (USB_ENDPOINT_XFER_ISOC == type)) {
+ if (USB_DIR_IN & desc->bEndpointAddress)
+ ep = find_ep (gadget, "ep5in");
+ else
+ ep = find_ep (gadget, "ep6out");
+ } else
+ ep = NULL;
+ if (ep && ep_matches (gadget, ep, desc))
+ return ep;
+#endif
}
/* Second, look at endpoints until an unclaimed one looks usable */
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
