[PATCH 072/220] USB: musb: Add new fifo table for a OMAP3 errata

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>

We have observed MSC data read corruption when USB LAN device is
also connected and it's interface is up.

Silicon team has confirmed an errata where in all the active
transfers should use FIFO space either in first 8K or next 8K.
So far we have observed the issue in above use case scenario.

As a workaround to it, adding a new FIFO config (5) fitting well
within first 8K which can be used for such use cases.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
Acked-by: Anand Gadiyar <gadiyar@xxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/usb/musb/musb_core.c |   34 ++++++++++++++++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index b7e2d1b..c489326 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1095,6 +1095,36 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
 { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
 };
 
+/* mode 5 - fits in 8KB */
+static struct fifo_cfg __initdata mode_5_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
 
 /*
  * configure a fifo; for non-shared endpoints, this may be called
@@ -1210,6 +1240,10 @@ static int __init ep_config_from_table(struct musb *musb)
 		cfg = mode_4_cfg;
 		n = ARRAY_SIZE(mode_4_cfg);
 		break;
+	case 5:
+		cfg = mode_5_cfg;
+		n = ARRAY_SIZE(mode_5_cfg);
+		break;
 	}
 
 	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
-- 
1.7.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux