From: Cliff Cai <cliff.cai@xxxxxxxxxx>
All current Blackfin parts are using RTL v1.9, but they don't expose the
hardware registers to probe this dynamically. So hardcode the version to
v1.9 for now.
Need to move the local hwvers related defines higher up in the header so
that sub-musb headers may utilize them.
Signed-off-by: Cliff Cai <cliff.cai@xxxxxxxxxx>
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/musb/musb_core.h | 16 +++++++++-------
drivers/usb/musb/musb_regs.h | 6 +++++-
2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 74a55b9..17e7115 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -52,6 +52,15 @@ struct musb;
struct musb_hw_ep;
struct musb_ep;
+/* Helper defines for struct musb->hwvers */
+#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f)
+#define MUSB_HWVERS_MINOR(x) (x & 0x3ff)
+#define MUSB_HWVERS_RC 0x8000
+#define MUSB_HWVERS_1300 0x52C
+#define MUSB_HWVERS_1400 0x590
+#define MUSB_HWVERS_1800 0x720
+#define MUSB_HWVERS_1900 0x784
+#define MUSB_HWVERS_2000 0x800
#include "musb_debug.h"
#include "musb_dma.h"
@@ -322,13 +331,6 @@ struct musb {
struct clk *clock;
irqreturn_t (*isr)(int, void *);
struct work_struct irq_work;
-#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f)
-#define MUSB_HWVERS_MINOR(x) (x & 0x3ff)
-#define MUSB_HWVERS_RC 0x8000
-#define MUSB_HWVERS_1300 0x52C
-#define MUSB_HWVERS_1400 0x590
-#define MUSB_HWVERS_1800 0x720
-#define MUSB_HWVERS_2000 0x800
u16 hwvers;
/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 895fb05..292894a 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -533,7 +533,11 @@ static inline u8 musb_read_configdata(void __iomem *mbase)
static inline u16 musb_read_hwvers(void __iomem *mbase)
{
- return 0;
+ /*
+ * This register is invisible on Blackfin, actually the MUSB
+ * RTL version of Blackfin is 1.9, so just harcode its value.
+ */
+ return MUSB_HWVERS_1900;
}
static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
