[PATCH 183/220] USB: atmel uaba: Adding invert vbus_pin

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Eirik Aanonsen <EAA@xxxxxxxxxxxxxx>

Adding vbus_pin_inverted so that the usb detect pin can be active high
or low depending on HW implementation also replaced the
gpio_get_value(udc->vbus_pin); with a call to vbus_is_present(udc); This
allows the driver to be loaded and save about 0,15W on the consumption.

Signed-off-by: Eirik Aanonsen <eaa@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 arch/avr32/mach-at32ap/at32ap700x.c |    7 +++++--
 drivers/usb/gadget/atmel_usba_udc.c |    5 +++--
 drivers/usb/gadget/atmel_usba_udc.h |    1 +
 include/linux/usb/atmel_usba_udc.h  |    1 +
 4 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index b13d187..3a4bc1a 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1770,10 +1770,13 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
 					  ARRAY_SIZE(usba0_resource)))
 		goto out_free_pdev;
 
-	if (data)
+	if (data) {
 		usba_data.pdata.vbus_pin = data->vbus_pin;
-	else
+		usba_data.pdata.vbus_pin_inverted = data->vbus_pin_inverted;
+	} else {
 		usba_data.pdata.vbus_pin = -EINVAL;
+		usba_data.pdata.vbus_pin_inverted = -EINVAL;
+	}
 
 	data = &usba_data.pdata;
 	data->num_ep = ARRAY_SIZE(at32_usba_ep);
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 976822f..f79bdfe 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -320,7 +320,7 @@ static inline void usba_cleanup_debugfs(struct usba_udc *udc)
 static int vbus_is_present(struct usba_udc *udc)
 {
 	if (gpio_is_valid(udc->vbus_pin))
-		return gpio_get_value(udc->vbus_pin);
+		return gpio_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted;
 
 	/* No Vbus detection: Assume always present */
 	return 1;
@@ -1763,7 +1763,7 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
 	if (!udc->driver)
 		goto out;
 
-	vbus = gpio_get_value(udc->vbus_pin);
+	vbus = vbus_is_present(udc);
 	if (vbus != udc->vbus_prev) {
 		if (vbus) {
 			toggle_bias(1);
@@ -2000,6 +2000,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	if (gpio_is_valid(pdata->vbus_pin)) {
 		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
 			udc->vbus_pin = pdata->vbus_pin;
+			udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
 
 			ret = request_irq(gpio_to_irq(udc->vbus_pin),
 					usba_vbus_irq, 0,
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index f7baea3..88a2e07 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -323,6 +323,7 @@ struct usba_udc {
 	struct platform_device *pdev;
 	int irq;
 	int vbus_pin;
+	int vbus_pin_inverted;
 	struct clk *pclk;
 	struct clk *hclk;
 
diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h
index 6311fa2..baf41c8 100644
--- a/include/linux/usb/atmel_usba_udc.h
+++ b/include/linux/usb/atmel_usba_udc.h
@@ -15,6 +15,7 @@ struct usba_ep_data {
 
 struct usba_platform_data {
 	int			vbus_pin;
+	int		 	vbus_pin_inverted;
 	int			num_ep;
 	struct usba_ep_data	ep[0];
 };
-- 
1.7.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux