[PATCH 153/220] USB: ftdi_sio: correct spelling in header files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Andreas Mohr <andi@xxxxxxxx>

- correct spelling/whitespace in ftdi_sio.h and ftdi_sio_ids.h

Signed-off-by: Andreas Mohr <andi@xxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/usb/serial/ftdi_sio.h     |    6 +++---
 drivers/usb/serial/ftdi_sio_ids.h |   24 ++++++++++++------------
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index b0e0d64..ff9bf80 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -28,13 +28,13 @@
 #define FTDI_SIO_SET_FLOW_CTRL	2 /* Set flow control register */
 #define FTDI_SIO_SET_BAUD_RATE	3 /* Set baud rate */
 #define FTDI_SIO_SET_DATA	4 /* Set the data characteristics of the port */
-#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modern status register */
+#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem status register */
 #define FTDI_SIO_SET_EVENT_CHAR	6 /* Set the event character */
 #define FTDI_SIO_SET_ERROR_CHAR	7 /* Set the error character */
 #define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
 #define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
 
-/* Interface indicies for FT2232, FT2232H and FT4232H devices*/
+/* Interface indices for FT2232, FT2232H and FT4232H devices */
 #define INTERFACE_A		1
 #define INTERFACE_B		2
 #define INTERFACE_C		3
@@ -270,7 +270,7 @@ typedef enum {
  *   BmRequestType:  0100 0000b
  *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
  *   wValue:         Xoff/Xon
- *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
+ *   wIndex:         Protocol/Port - hIndex is protocol / lIndex is port
  *   wLength:        0
  *   Data:           None
  *
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index c8951ae..f9efd97 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -22,7 +22,7 @@
 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
-#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX  */
+#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
 
 
@@ -49,7 +49,7 @@
 #define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
 #define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
 
-#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
 
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
@@ -185,7 +185,7 @@
 #define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
 #define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
 #define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
-#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
+#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Energy monitor EM 1010 PC */
 #define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
 #define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 #define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
@@ -212,8 +212,8 @@
  * drivers, or possibly the Comedi drivers in some cases. */
 #define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
 #define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperatur-Feuchte-Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkuhr (UDF 77) */
 #define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
 
 /*
@@ -320,7 +320,7 @@
 
 /*
  * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
+ * USB-TTY aktiv, USB-TTY passiv.  Some PIDs are used by several devices
  * and I'm not entirely sure which are used by which.
  */
 #define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
@@ -330,10 +330,10 @@
  * Linx Technologies product ids
  */
 #define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
-#define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
-#define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
-#define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
-#define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
+#define LINX_MASTERDEVEL2_PID   0xF449	/* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID   0xF44A	/* Linx future device */
+#define LINX_FUTURE_1_PID   0xF44B	/* Linx future device */
+#define LINX_FUTURE_2_PID   0xF44C	/* Linx future device */
 
 /*
  * Oceanic product ids
@@ -642,7 +642,7 @@
 #define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
 #define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
 
-/* Larsen and Brusgaard AltiTrack/USBtrack  */
+/* Larsen and Brusgaard AltiTrack/USBtrack */
 #define LARSENBRUSGAARD_VID		0x0FD8
 #define LB_ALTITRACK_PID		0x0001
 
@@ -971,7 +971,7 @@
 #define ALTI2_N3_PID	0x6001	/* Neptune 3 */
 
 /*
- * Dresden Elektronic Sensor Terminal Board
+ * Dresden Elektronik Sensor Terminal Board
  */
 #define DE_VID			0x1cf1 /* Vendor ID */
 #define STB_PID			0x0001 /* Sensor Terminal Board */
-- 
1.7.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux