From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
This patch (as1327) changes the way negative autosuspend delays
prevent device from autosuspending. The current code checks for
negative values explicitly in the autosuspend_check() routine. The
updated code keeps things from getting that far by using
usb_autoresume_device() to increment the usage counter when a negative
delay is set, and by using usb_autosuspend_device() to decrement the
usage counter when a non-negative delay is set.
This complicates the set_autosuspend() attribute method code slightly,
but it will reduce the overall power management overhead.
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/core/quirks.c | 10 ++++++++++
drivers/usb/core/sysfs.c | 22 +++++++++++++++++-----
2 files changed, 27 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 4314f25..f073c5c 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -103,11 +103,21 @@ void usb_detect_quirks(struct usb_device *udev)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
udev->quirks);
+#ifdef CONFIG_USB_SUSPEND
+
/* By default, disable autosuspend for all devices. The hub driver
* will enable it for hubs.
*/
usb_disable_autosuspend(udev);
+ /* Autosuspend can also be disabled if the initial autosuspend_delay
+ * is negative.
+ */
+ if (udev->autosuspend_delay < 0)
+ usb_autoresume_device(udev);
+
+#endif
+
/* For the present, all devices default to USB-PERSIST enabled */
#if 0 /* was: #ifdef CONFIG_PM */
/* Hubs are automatically enabled for USB-PERSIST */
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 313e241..43c002e 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -346,7 +346,8 @@ set_autosuspend(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct usb_device *udev = to_usb_device(dev);
- int value;
+ int value, old_delay;
+ int rc;
if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/HZ ||
value <= - INT_MAX/HZ)
@@ -354,13 +355,24 @@ set_autosuspend(struct device *dev, struct device_attribute *attr,
value *= HZ;
usb_lock_device(udev);
+ old_delay = udev->autosuspend_delay;
udev->autosuspend_delay = value;
- if (value >= 0)
- usb_try_autosuspend_device(udev);
- else {
- if (usb_autoresume_device(udev) == 0)
+
+ if (old_delay < 0) { /* Autosuspend wasn't allowed */
+ if (value >= 0)
usb_autosuspend_device(udev);
+ } else { /* Autosuspend was allowed */
+ if (value < 0) {
+ rc = usb_autoresume_device(udev);
+ if (rc < 0) {
+ count = rc;
+ udev->autosuspend_delay = old_delay;
+ }
+ } else {
+ usb_try_autosuspend_device(udev);
+ }
}
+
usb_unlock_device(udev);
return count;
}
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
