It's really the wireless speed, so rename the thing to make
more sense. Based on a recommendation from David Vrabel
Cc: David Vrabel <david.vrabel@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/usbip/vhci_sysfs.c | 2 +-
drivers/usb/core/hub.c | 6 +++---
drivers/usb/core/sysfs.c | 2 +-
drivers/usb/core/urb.c | 6 +++---
drivers/usb/host/xhci-mem.c | 4 ++--
drivers/usb/wusbcore/devconnect.c | 2 +-
include/linux/usb/ch9.h | 2 +-
7 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
index d8992d1..f6e34e0 100644
--- a/drivers/staging/usbip/vhci_sysfs.c
+++ b/drivers/staging/usbip/vhci_sysfs.c
@@ -144,7 +144,7 @@ static int valid_args(__u32 rhport, enum usb_device_speed speed)
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
- case USB_SPEED_VARIABLE:
+ case USB_SPEED_WIRELESS:
break;
default:
usbip_uerr("speed %d\n", speed);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6f84d38..4986ff6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1990,7 +1990,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
if (!(portstatus & USB_PORT_STAT_RESET) &&
(portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
- udev->speed = USB_SPEED_VARIABLE;
+ udev->speed = USB_SPEED_WIRELESS;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
@@ -2689,7 +2689,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
*/
switch (udev->speed) {
case USB_SPEED_SUPER:
- case USB_SPEED_VARIABLE: /* fixed at 512 */
+ case USB_SPEED_WIRELESS: /* fixed at 512 */
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
break;
case USB_SPEED_HIGH: /* fixed at 64 */
@@ -2717,7 +2717,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
case USB_SPEED_SUPER:
speed = "super";
break;
- case USB_SPEED_VARIABLE:
+ case USB_SPEED_WIRELESS:
speed = "variable";
type = "Wireless ";
break;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index b1725ab..1b3c00b 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -115,7 +115,7 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf)
case USB_SPEED_HIGH:
speed = "480";
break;
- case USB_SPEED_VARIABLE:
+ case USB_SPEED_WIRELESS:
speed = "480";
break;
case USB_SPEED_SUPER:
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index e2bd153..2708056 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -437,7 +437,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
case USB_ENDPOINT_XFER_INT:
/* too small? */
switch (dev->speed) {
- case USB_SPEED_VARIABLE:
+ case USB_SPEED_WIRELESS:
if (urb->interval < 6)
return -EINVAL;
break;
@@ -453,7 +453,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
if (urb->interval > (1 << 15))
return -EINVAL;
max = 1 << 15;
- case USB_SPEED_VARIABLE:
+ case USB_SPEED_WIRELESS:
if (urb->interval > 16)
return -EINVAL;
break;
@@ -480,7 +480,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
default:
return -EINVAL;
}
- if (dev->speed != USB_SPEED_VARIABLE) {
+ if (dev->speed != USB_SPEED_WIRELESS) {
/* Round down to a power of 2, no more than max */
urb->interval = min(max, 1 << ilog2(urb->interval));
}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 8045bc6..49f7d72 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -454,7 +454,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
case USB_SPEED_LOW:
slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
break;
- case USB_SPEED_VARIABLE:
+ case USB_SPEED_WIRELESS:
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
return -EINVAL;
break;
@@ -498,7 +498,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
case USB_SPEED_LOW:
ep0_ctx->ep_info2 |= MAX_PACKET(8);
break;
- case USB_SPEED_VARIABLE:
+ case USB_SPEED_WIRELESS:
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
return -EINVAL;
break;
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index dced419..1c91828 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -868,7 +868,7 @@ static struct usb_wireless_cap_descriptor wusb_cap_descr_default = {
* reference that we'll drop.
*
* First we need to determine if the device is a WUSB device (else we
- * ignore it). For that we use the speed setting (USB_SPEED_VARIABLE)
+ * ignore it). For that we use the speed setting (USB_SPEED_WIRELESS)
* [FIXME: maybe we'd need something more definitive]. If so, we track
* it's usb_busd and from there, the WUSB HC.
*
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 94012e6..e58369f 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -775,7 +775,7 @@ enum usb_device_speed {
USB_SPEED_UNKNOWN = 0, /* enumerating */
USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
USB_SPEED_HIGH, /* usb 2.0 */
- USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
+ USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
USB_SPEED_SUPER, /* usb 3.0 */
};
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
