Re: [PATCH RFC] OHCI: DA8xx/OMAP-L1x glue layer (take 3)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

stanley.miao wrote:

Why was not this patch pushed to git tree ?

Good question. Probably because at the time it was a patch against DaVinci tree only, not against Linus' tree. Anyways, now it should apply to the Linus' tree, and I'm going to repost it before it's too late :-)

Stanley.

Sergei Shtylyov wrote:
Texas Instruments DA8xx/OMAP-L1x OHCI glue layer.

This OHCI implementation is not without quirks: there's only one physical port despite the root hub reporting two; the port's power control and over-current status bits are not connected to any pins, however, at least on the DA830 EVM board, those signals are connected via GPIO, thus the provision was made for overriding the OHCI port power and over-current bits at the board level...

Signed-off-by: Mikhail Cherkashin <mcherkashin@xxxxxxxxxxxxx>
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>


WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux