On Tue, Jan 26, 2010 at 05:35:21AM -0800, David Brownell wrote: > On Tuesday 26 January 2010, Mark Brown wrote: > > Yes please - it's not just chargers either, this can also be used by > > PMICs which do power path management that includes USB. > Color me confused ... what do you mean by "power path"? In the sort of design I'm talking about there is generally a system power rail which is generated from the various power sources available to the system, which might include a combination of batteries, USB and wall adaptors. The power path management logic is the hardware which controls which of these are actually being used as supplies, and may also include battery charger management. > Do you mean something like "the board as a whole can take N mA of > current from USB", rather than specifically addressing a charger? Pretty much, from this point of view. > It's not uncommon to do things like use VBUS current to power the > USB circuitry, too. That can leave less for other purposes. All > of that being rather board-specific. In this sort of design either VBUS goes through the power path management logic before anything else gets to use it or the hardware will know about the headroom it needs to leave. The power path management will usually do things like try to suppliment VBUS with any battery that's available to generate the main system supply rail. This all needs to function without software since it tends to get used to decide things like if the system is able to begin power up at all, . > > > Those seem like the wrong events. The right events for a charger > > > would be more along the lines of: > > > - For peripheral: "you may use N milliAmperes now". > > > - General: "Don't Charge" (a.k.a. "use 0 mA"). > > > I don't see how "N" would be passed with those events ... > > These are good for the peripheral side. You do get to pass a void * > > along with the notifier value, that could be used to pass data like the > > current limit. > I don't think I saw that being done ... either in code, comments, > or documentation. Passing N is fundamental. I think we're talking at cross purposes - I was reading "these events" as being the new events quoted above, not the events in the existing code. I certainly agree that N is fundamental. > Thing is, supplying current is a bit more involved. If the > board can't supply 300 mA, the USB configuration selection > mechanism has to know that, so it never selects peripheral > configurations which require that much current. Indeed, the specific limits are more used for protection against things like the connected devices drawing more current than they claimed than anything else. > Ergo my desire to start with a straightforward problem whose > solution has real value (how much VBUS current may be consumed?), > and leave some of those other messes for later! Understandable. It would be good to have an idea what sort of general direction to go in there, though I do agree that the gadget case is much more important here. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
