> On Thu, Jan 21, 2010 at 03:59:59PM -0800, Andrew Morton wrote: > > thinkpad_acpi: THERMAL EMERGENCY: a sensor reports something is extremely hot! > > thinkpad_acpi: temperatures (Celsius): 95 47 N/A 89 47 N/A 41 N/A 51 61 N/A N/A N/A N/A N/A N/A > > Bad fan? More likely bad thermal paste. > > ehci_hcd 0000:00:1d.7: port 5 high speed > > ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT > > usb 1-5: reset high speed USB device using ehci_hcd and address 8 > > ehci_hcd 0000:00:1d.7: port 5 high speed > > ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT > > usb 1-5: serial string changed > > usb 1-5: device firmware changed > > hub 1-0:1.0: logical disconnect on port 5 > > hub 1-0:1.0: state 7 ports 8 chg 0020 evt 0000 > > hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s > > usb 1-5: USB disconnect, address 8 > > usb 1-5: unregistering device > > usb 1-5: usb_disable_device nuking all URBs > > Your device electronically disconnected itself, not much that we can do > about this. > > Bad cable? Bad power supply to the device? > > I blame the hardware :) It worked before, same disk, but maybe different cabling. Lets see if it reappears. -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
