we were printing the info about musb probe too early where
it was still possible for things to go wrong. Move the
down right before the return 0 statement. While at that
also convert pr_info to dev_info.
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
drivers/usb/musb/musb_core.c | 25 ++++++++++++-------------
1 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index de7b377..0f13ded 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2004,19 +2004,6 @@ bad_config:
musb->irq_wake = 0;
}
- pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n",
- musb_driver_name,
- ({char *s;
- switch (musb->board_mode) {
- case MUSB_HOST: s = "Host"; break;
- case MUSB_PERIPHERAL: s = "Peripheral"; break;
- default: s = "OTG"; break;
- }; s; }),
- ctrl,
- (is_dma_capable() && musb->dma_controller)
- ? "DMA" : "PIO",
- musb->nIrq);
-
/* host side needs more setup */
if (is_host_enabled(musb)) {
struct usb_hcd *hcd = musb_to_hcd(musb);
@@ -2079,6 +2066,18 @@ bad_config:
if (status)
goto fail2;
+ dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
+ ({char *s;
+ switch (musb->board_mode) {
+ case MUSB_HOST: s = "Host"; break;
+ case MUSB_PERIPHERAL: s = "Peripheral"; break;
+ default: s = "OTG"; break;
+ }; s; }),
+ ctrl,
+ (is_dma_capable() && musb->dma_controller)
+ ? "DMA" : "PIO",
+ musb->nIrq);
+
return 0;
fail2:
--
1.6.6.rc0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
