On 4.03.2025 10:56 PM, Melody Olvera wrote:
> From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
>
> Add the base USB devicetree definitions for SM8750 platforms. The overall
> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
> (rev. v8) and M31 eUSB2 PHY. The major difference for SM8750 is the
> transition to using the M31 eUSB2 PHY compared to previous SoCs.
>
> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
>
> Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
> ---
[...]
> + usb_1: usb@a6f8800 {
> + compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
> + reg = <0x0 0x0a6f8800 0x0 0x400>;
> + status = "disabled";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
Please follow property order / general style found in x1e80100.dtsi
> +
> + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&tcsrcc TCSR_USB3_CLKREF_EN>;
> + clock-names = "cfg_noc",
> + "core",
> + "iface",
> + "sleep",
> + "mock_utmi",
> + "xo";
> +
> + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <200000000>;
> +
> + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> + <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
> + <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
> + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "pwr_event",
> + "hs_phy_irq",
> + "dp_hs_phy_irq",
> + "dm_hs_phy_irq",
> + "ss_phy_irq";
> +
> + power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + resets = <&gcc GCC_USB30_PRIM_BCR>;
> +
> + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
QCOM_ICC_TAG_ALWAYS
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
QCOM_ICC_TAG_ACTIVE_ONLY
Konrad
