On Tue, Feb 18, 2025 at 09:22:43AM +0100, Johan Hovold wrote:
> Fix the probe error handling to avoid unbalanced clock disable or
> leaving regulators on after probe failure.
>
> Note that the active-low reset pin should also be asserted to avoid
> leaking current after disabling the regulators.
>
> Fixes: 257a087c8b52 ("usb: typec: Add support for Parade PS8830 Type-C Retimer")
> Cc: Abel Vesa <abel.vesa@xxxxxxxxxx>
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> ---
> drivers/usb/typec/mux/ps883x.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/typec/mux/ps883x.c b/drivers/usb/typec/mux/ps883x.c
> index 10e407ab6b7f..ef086989231f 100644
> --- a/drivers/usb/typec/mux/ps883x.c
> +++ b/drivers/usb/typec/mux/ps883x.c
> @@ -387,10 +387,11 @@ static int ps883x_retimer_probe(struct i2c_client *client)
>
> err_switch_unregister:
> typec_switch_unregister(retimer->sw);
> -err_vregs_disable:
> - ps883x_disable_vregs(retimer);
> err_clk_disable:
> clk_disable_unprepare(retimer->xo_clk);
> +err_vregs_disable:
> + gpiod_set_value(retimer->reset_gpio, 1);
> + ps883x_disable_vregs(retimer);
> err_mux_put:
> typec_mux_put(retimer->typec_mux);
> err_switch_put:
> --
> 2.45.3
--
heikki
