Hello Claudiu-san, > From: Claudiu, Sent: Thursday, February 20, 2025 1:13 AM > > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> > > Hi, > > Series add fixes for the Renesas USBHS driver identified while > working on the Renesas USB PHY driver (series at [1]). > > Series (with [1] on top) was tested on Renesas RZ/G3S with consecutive > unbind/bind and data transfer tests before/after the unbind/bind. > > The unbind/bind was also tested on the devices with the following > device trees but w/o checking the data transfer (as I only had > remote access w/o USB devices connected): > - r8a7742-iwg21d-q7.dts > - r8a7743-iwg20d-q7.dts > - r8a7744-iwg20d-q7.dts > - r8a7745-iwg22d-sodimm.dts > - r8a77470-iwg23s-sbc.dts > - r8a774a1-hihope-rzg2m-ex.dts > - r8a774b1-hihope-rzg2n-ex.dts > - r8a774e1-hihope-rzg2h-ex.dts > - r9a07g043u11-smarc.dts > - r9a07g044c2-smarc.dts > - r9a07g044l2-smarc.dts > - r9a07g054l2-smarc.dts > - r9a07g043f01-smarc.dts > > Please give it a try also on your devices with [1] on top as well. Thank you for the patches! Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> I tested on my environment (r8a77951-salvator-xs.dts) and it worked correctly. So, Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Best regards, Yoshihiro Shimoda > Thank you, > Claudiu Beznea > > Claudiu Beznea (3): > usb: renesas_usbhs: Call clk_put() > usb: renesas_usbhs: Use devm_usb_get_phy() > usb: renesas_usbhs: Flush the notify_hotplug_work > > drivers/usb/renesas_usbhs/common.c | 6 +++++- > drivers/usb/renesas_usbhs/mod_gadget.c | 2 +- > 2 files changed, 6 insertions(+), 2 deletions(-) > > -- > 2.43.0
