Add USB2.0 controller and phy nodes.
Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx95.dtsi | 30 ++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 0b64a1df3c7a..a7c87b9843bd 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -463,6 +463,13 @@ its: msi-controller@48040000 {
};
};
+ usbphynop: usbphynop {
+ compatible = "usb-nop-xceiv";
+ clocks = <&scmi_clk IMX95_CLK_HSIO>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -1579,6 +1586,29 @@ usb3_phy: phy@4c1f0040 {
status = "disabled";
};
+ usb2: usb@4c200000 {
+ compatible = "fsl,imx95-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x0 0x4c200000 0x0 0x200>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_HSIO>,
+ <&scmi_clk IMX95_CLK_32K>;
+ clock-names = "usb_ctrl_root", "usb_wakeup";
+ iommus = <&smmu 0xf>;
+ phys = <&usbphynop>;
+ power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+ fsl,usbmisc = <&usbmisc 0>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@4c200200 {
+ compatible = "fsl,imx95-usbmisc", "fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
+ reg = <0x0 0x4c200200 0x0 0x200>,
+ <0x0 0x4c010014 0x0 0x04>;
+ #index-cells = <1>;
+ };
+
pcie0: pcie@4c300000 {
compatible = "fsl,imx95-pcie";
reg = <0 0x4c300000 0 0x10000>,
--
2.34.1
