[PATCH 3/3] usb: typec: ps883x: fix configuration error handling

[Johan Hovold <johan+linaro@xxxxxxxxxx>]

Propagate errors to the consumers when configuring the retimer so that
they can act on any failures as intended, for example:

	ps883x_retimer 2-0008: failed to write conn_status_0: -5
	pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to setup retimer to DP: -5

Fixes: 257a087c8b52 ("usb: typec: Add support for Parade PS8830 Type-C Retimer")
Cc: Abel Vesa <abel.vesa@xxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 drivers/usb/typec/mux/ps883x.c | 36 ++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/typec/mux/ps883x.c b/drivers/usb/typec/mux/ps883x.c
index f8b47187f4cf..ad59babf7cce 100644
--- a/drivers/usb/typec/mux/ps883x.c
+++ b/drivers/usb/typec/mux/ps883x.c
@@ -58,12 +58,31 @@ struct ps883x_retimer {
 	unsigned int svid;
 };
 
-static void ps883x_configure(struct ps883x_retimer *retimer, int cfg0,
-			     int cfg1, int cfg2)
+static int ps883x_configure(struct ps883x_retimer *retimer, int cfg0,
+			    int cfg1, int cfg2)
 {
-	regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_0, cfg0);
-	regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_1, cfg1);
-	regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_2, cfg2);
+	struct device *dev = &retimer->client->dev;
+	int ret;
+
+	ret = regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_0, cfg0);
+	if (ret) {
+		dev_err(dev, "failed to write conn_status_0: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_1, cfg1);
+	if (ret) {
+		dev_err(dev, "failed to write conn_status_1: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_write(retimer->regmap, REG_USB_PORT_CONN_STATUS_2, cfg2);
+	if (ret) {
+		dev_err(dev, "failed to write conn_status_2: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
 }
 
 static int ps883x_set(struct ps883x_retimer *retimer)
@@ -74,8 +93,7 @@ static int ps883x_set(struct ps883x_retimer *retimer)
 
 	if (retimer->orientation == TYPEC_ORIENTATION_NONE ||
 	    retimer->mode == TYPEC_STATE_SAFE) {
-		ps883x_configure(retimer, cfg0, cfg1, cfg2);
-		return 0;
+		return ps883x_configure(retimer, cfg0, cfg1, cfg2);
 	}
 
 	if (retimer->mode != TYPEC_STATE_USB && retimer->svid != USB_TYPEC_DP_SID)
@@ -113,9 +131,7 @@ static int ps883x_set(struct ps883x_retimer *retimer)
 		return -EOPNOTSUPP;
 	}
 
-	ps883x_configure(retimer, cfg0, cfg1, cfg2);
-
-	return 0;
+	return ps883x_configure(retimer, cfg0, cfg1, cfg2);
 }
 
 static int ps883x_sw_set(struct typec_switch_dev *sw,
-- 
2.45.3