Some Renesas HCs require firmware upload to work, this is handled by the
xhci_pci_renesas driver. Other variants of those chips load firmware from
onboard flash and can work with xhci_pci alone.
A refactor merged in v6.12 broke the latter configuration and users are
finding their hardware not working after upgrading and need to enable the
firmware loader which isn't really necessary on their systems.
Let xhci_pci work with those chips as before when the firmware loader is
disabled by kernel configuration.
Fixes: 25f51b76f90f ("xhci-pci: Make xhci-pci-renesas a proper modular driver")
CC: stable@xxxxxxxxxxxxxxx
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219616
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219726
Signed-off-by: Michal Pecio <michal.pecio@xxxxxxxxx>
---
drivers/usb/host/xhci-pci.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5a5f0b2dba4d..3d08d6527b1d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -657,17 +657,21 @@ int xhci_pci_common_probe(struct pci_dev *dev, const struct pci_device_id *id)
}
EXPORT_SYMBOL_NS_GPL(xhci_pci_common_probe, "xhci");
+#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
static const struct pci_device_id pci_ids_reject[] = {
/* handled by xhci-pci-renesas */
{ PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0014) },
{ PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0015) },
{ /* end: all zeroes */ }
};
+#endif
static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
+#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
if (pci_match_id(pci_ids_reject, dev))
return -ENODEV;
+#endif
return xhci_pci_common_probe(dev, id);
}
--
2.48.1
