Signed-off-by: Max Schulze <max.schulze@xxxxxxxxx> Tested-by: Max Schulze <max.schulze@xxxxxxxxx> Suggested-by: David Hollis <dhollis@xxxxxxxxxxxxxx> Reported-by: Sven Kreiensen <s.kreiensen@xxxxxxxxxxxx> Link: https://marc.info/?l=linux-netdev&m=140742722321328 --- This patch had previously been suggested at "Link:". However, I found that the flag quirk is not necessary and I suspect it has never worked (because it references ".flag" whereas the identifying value is in ".data") I have compiled this and tested successfully with two devices. As it now only adds the USB Id it generates no extra maintenance burden that's why I suggest it for inclusion. drivers/net/usb/asix_devices.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 57d6e5abc30e..ef7aae8f3594 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -1421,6 +1421,19 @@ static const struct driver_info hg20f9_info = { .data = FLAG_EEPROM_MAC, }; +static const struct driver_info lyconsys_fibergecko100_info = { + .description = "LyconSys FiberGecko 100 USB 2.0 to SFP Adapter", + .bind = ax88178_bind, + .status = asix_status, + .link_reset = ax88178_link_reset, + .reset = ax88178_link_reset, + .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | + FLAG_MULTI_PACKET, + .rx_fixup = asix_rx_fixup_common, + .tx_fixup = asix_tx_fixup, + .data = 0x20061201, +}; + static const struct usb_device_id products [] = { { // Linksys USB200M @@ -1578,6 +1591,10 @@ static const struct usb_device_id products [] = { // Linux Automation GmbH USB 10Base-T1L USB_DEVICE(0x33f7, 0x0004), .driver_info = (unsigned long) &lxausb_t1l_info, +}, { + /* LyconSys FiberGecko 100 */ + USB_DEVICE(0x1d2a, 0x0801), + .driver_info = (unsigned long) &lyconsys_fibergecko100_info, }, { }, // END }; -- 2.43.0
