Syzkaller reports [1] encountering a common issue of utilizing a wrong usb endpoint type during URB submitting stage. This, in turn, triggers a warning shown below. For now, enable simple endpoint checking (specifically, bulk and interrupt eps, testing control one is not essential) to mitigate the issue with a view to do other related cosmetic changes later, if they are necessary. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv> Modules linked in: CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8> RSP: 0018:ffffc9000441f740 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9 RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001 RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733 __dev_open+0x2d4/0x4e0 net/core/dev.c:1474 __dev_change_flags+0x561/0x720 net/core/dev.c:8838 dev_change_flags+0x8f/0x160 net/core/dev.c:8910 devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177 inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x116/0x280 net/socket.c:1222 sock_ioctl+0x22e/0x6c0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc04ef73d49 ... This change has not been tested on real hardware. Reported-and-tested-by: syzbot+d7e968426f644b567e31@xxxxxxxxxxxxxxxxxxxxxxxxx Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Nikita Zhandarovich <n.zhandarovich@xxxxxxxxxx> --- v1 -> v2: move declarations of ep addresses to the beginning of rtl8150_probe() to remove a build warning in older branches (courtesy of -Wdeclaration-after-statement). drivers/net/usb/rtl8150.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 01a3b2417a54..ddff6f19ff98 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -71,6 +71,14 @@ #define MSR_SPEED (1<<3) #define MSR_LINK (1<<2) +/* USB endpoints */ +enum rtl8150_usb_ep { + RTL8150_USB_EP_CONTROL = 0, + RTL8150_USB_EP_BULK_IN = 1, + RTL8150_USB_EP_BULK_OUT = 2, + RTL8150_USB_EP_INT_IN = 3, +}; + /* Interrupt pipe data */ #define INT_TSR 0x00 #define INT_RSR 0x01 @@ -867,6 +875,13 @@ static int rtl8150_probe(struct usb_interface *intf, struct usb_device *udev = interface_to_usbdev(intf); rtl8150_t *dev; struct net_device *netdev; + static const u8 bulk_ep_addr[] = { + RTL8150_USB_EP_BULK_IN | USB_DIR_IN, + RTL8150_USB_EP_BULK_OUT | USB_DIR_OUT, + 0}; + static const u8 int_ep_addr[] = { + RTL8150_USB_EP_INT_IN | USB_DIR_IN, + 0}; netdev = alloc_etherdev(sizeof(rtl8150_t)); if (!netdev) @@ -880,6 +895,13 @@ static int rtl8150_probe(struct usb_interface *intf, return -ENOMEM; } + /* Verify that all required endpoints are present */ + if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) || + !usb_check_int_endpoints(intf, int_ep_addr)) { + dev_err(&intf->dev, "couldn't find required endpoints\n"); + goto out; + } + tasklet_setup(&dev->tl, rx_fixup); spin_lock_init(&dev->rx_pool_lock);
