Hi,
On Tue, Jan 14, 2025 at 01:51:26AM +0800, Pengyu Luo wrote:
> The Huawei Matebook E Go tablet implements the UCSI interface in the
> onboard EC. Add the glue driver to interface with the platform's UCSI
> implementation.
>
> Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx>
> ---
> drivers/usb/typec/ucsi/Kconfig | 11 +
> drivers/usb/typec/ucsi/Makefile | 1 +
> drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c | 526 ++++++++++++++++++++
> 3 files changed, 538 insertions(+)
> create mode 100644 drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c
>
> diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> index 75559601f..e94956d27 100644
> --- a/drivers/usb/typec/ucsi/Kconfig
> +++ b/drivers/usb/typec/ucsi/Kconfig
> @@ -91,4 +91,15 @@ config UCSI_LENOVO_YOGA_C630
> To compile the driver as a module, choose M here: the module will be
> called ucsi_yoga_c630.
>
> +config UCSI_HUAWEI_GAOKUN
> + tristate "UCSI Interface Driver for Huawei Matebook E Go"
> + depends on EC_HUAWEI_GAOKUN
> + select DRM_AUX_HPD_BRIDGE
> + help
> + This driver enables UCSI support on the Huawei Matebook E Go tablet,
> + which is a sc8280xp-based 2-in-1 tablet.
> +
> + To compile the driver as a module, choose M here: the module will be
> + called ucsi_huawei_gaokun.
> +
> endif
> diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> index be98a8791..dbc571763 100644
> --- a/drivers/usb/typec/ucsi/Makefile
> +++ b/drivers/usb/typec/ucsi/Makefile
> @@ -23,3 +23,4 @@ obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
> obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
> obj-$(CONFIG_CROS_EC_UCSI) += cros_ec_ucsi.o
> obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o
> +obj-$(CONFIG_UCSI_HUAWEI_GAOKUN) += ucsi_huawei_gaokun.o
> diff --git a/drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c b/drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c
> new file mode 100644
> index 000000000..da1993805
> --- /dev/null
> +++ b/drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c
> @@ -0,0 +1,527 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ucsi-huawei-gaokun - A UCSI driver for HUAWEI Matebook E Go
> + *
> + * reference: drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> + * drivers/usb/typec/ucsi/ucsi_glink.c
> + * drivers/soc/qcom/pmic_glink_altmode.c
> + *
> + * Copyright (C) 2024 Pengyu Luo <mitltlatltl@xxxxxxxxx>
> + */
> +
> +#include <drm/bridge/aux-bridge.h>
> +#include <linux/auxiliary_bus.h>
> +#include <linux/bitops.h>
> +#include <linux/completion.h>
> +#include <linux/container_of.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/platform_data/huawei-gaokun-ec.h>
> +#include <linux/string.h>
> +#include <linux/usb/pd_vdo.h>
> +#include <linux/usb/typec_altmode.h>
> +#include <linux/usb/typec_dp.h>
> +#include <linux/workqueue_types.h>
> +
> +#include "ucsi.h"
> +
> +#define EC_EVENT_UCSI 0x21
> +#define EC_EVENT_USB 0x22
> +
> +#define GAOKUN_CCX_MASK GENMASK(1, 0)
> +#define GAOKUN_MUX_MASK GENMASK(3, 2)
> +
> +#define GAOKUN_DPAM_MASK GENMASK(3, 0)
> +#define GAOKUN_HPD_STATE_MASK BIT(4)
> +#define GAOKUN_HPD_IRQ_MASK BIT(5)
> +
> +#define GET_IDX(updt) (ffs(updt) - 1)
> +
> +#define CCX_TO_ORI(ccx) (++ccx % 3) /* convert ccx to enum typec_orientation */
> +
> +/* Configuration Channel Extension */
> +enum gaokun_ucsi_ccx {
> + USBC_CCX_NORMAL,
> + USBC_CCX_REVERSE,
> + USBC_CCX_NONE,
> +};
> +
> +enum gaokun_ucsi_mux {
> + USBC_MUX_NONE,
> + USBC_MUX_USB_2L,
> + USBC_MUX_DP_4L,
> + USBC_MUX_USB_DP,
> +};
Missing newline.
> +/* based on pmic_glink_altmode_pin_assignment */
> +enum gaokun_ucsi_dpam_pan { /* DP Alt Mode Pin Assignments */
> + USBC_DPAM_PAN_NONE,
> + USBC_DPAM_PAN_A, /* Not supported after USB Type-C Standard v1.0b */
> + USBC_DPAM_PAN_B, /* Not supported after USB Type-C Standard v1.0b */
> + USBC_DPAM_PAN_C, /* USBC_DPAM_PAN_C_REVERSE - 6 */
> + USBC_DPAM_PAN_D,
> + USBC_DPAM_PAN_E,
> + USBC_DPAM_PAN_F, /* Not supported after USB Type-C Standard v1.0b */
> + USBC_DPAM_PAN_A_REVERSE,/* Not supported after USB Type-C Standard v1.0b */
> + USBC_DPAM_PAN_B_REVERSE,/* Not supported after USB Type-C Standard v1.0b */
> + USBC_DPAM_PAN_C_REVERSE,
> + USBC_DPAM_PAN_D_REVERSE,
> + USBC_DPAM_PAN_E_REVERSE,
> + USBC_DPAM_PAN_F_REVERSE,/* Not supported after USB Type-C Standard v1.0b */
> +};
> +
> +struct gaokun_ucsi_reg {
> + u8 num_ports;
> + u8 port_updt;
> + u8 port_data[4];
> + u8 checksum;
> + u8 reserved;
> +} __packed;
> +
> +struct gaokun_ucsi_port {
> + struct completion usb_ack;
> + spinlock_t lock;
Locks need to be commented. Did you run checkpatch.pl on this?
> + struct gaokun_ucsi *ucsi;
> + struct auxiliary_device *bridge;
> +
> + int idx;
> + enum gaokun_ucsi_ccx ccx;
> + enum gaokun_ucsi_mux mux;
> + u8 mode;
> + u16 svid;
> + u8 hpd_state;
> + u8 hpd_irq;
> +};
> +
> +struct gaokun_ucsi {
> + struct gaokun_ec *ec;
> + struct ucsi *ucsi;
> + struct gaokun_ucsi_port *ports;
> + struct device *dev;
> + struct delayed_work work;
> + struct notifier_block nb;
> + u16 version;
> + u8 num_ports;
> +};
thanks,
--
heikki
