From: Lianqin Hu <hulianqin@xxxxxxxx>
Considering that in some extreme cases, when performing the
unbinding operation, gserial_disconnect has cleared gser->ioport,
which triggers gadget reconfiguration, and then calls gs_read_complete,
resulting in access to a null pointer. Therefore, ep is disabled before
gserial_disconnect sets port to null to prevent this from happening.
Call trace:
gs_read_complete+0x58/0x240
usb_gadget_giveback_request+0x40/0x160
dwc3_remove_requests+0x170/0x484
dwc3_ep0_out_start+0xb0/0x1d4
__dwc3_gadget_start+0x25c/0x720
kretprobe_trampoline.cfi_jt+0x0/0x8
kretprobe_trampoline.cfi_jt+0x0/0x8
udc_bind_to_driver+0x1d8/0x300
usb_gadget_probe_driver+0xa8/0x1dc
gadget_dev_desc_UDC_store+0x13c/0x188
configfs_write_iter+0x160/0x1f4
vfs_write+0x2d0/0x40c
ksys_write+0x7c/0xf0
__arm64_sys_write+0x20/0x30
invoke_syscall+0x60/0x150
el0_svc_common+0x8c/0xf8
do_el0_svc+0x28/0xa0
el0_svc+0x24/0x84
Fixes: c1dca562be8a ("usb gadget: split out serial core")
Cc: stable@xxxxxxxxxxxxxxx
Suggested-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Lianqin Hu <hulianqin@xxxxxxxx>
---
Changes in v3:
- Add --- line above the version tag information
- Remove extra blank lines in commit messages
- Version tag information from v2 to changes in v2
- Link to v2: https://lore.kernel.org/all/TYUPR06MB6217DAA095A9863D4B58D57CD23B2@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
Changes in v2:
- Remove some address information from patch descriptions
- Link to v1: https://lore.kernel.org/all/TYUPR06MB621763AB815989161F4033AFD2762@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
- Link to suggestions: https://lore.kernel.org/all/TYUPR06MB6217DE28012FFEC5E808DD64D2962@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
drivers/usb/gadget/function/u_serial.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 53d9fc41acc5..bc143a86c2dd 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -1420,6 +1420,10 @@ void gserial_disconnect(struct gserial *gser)
/* REVISIT as above: how best to track this? */
port->port_line_coding = gser->port_line_coding;
+ /* disable endpoints, aborting down any active I/O */
+ usb_ep_disable(gser->out);
+ usb_ep_disable(gser->in);
+
port->port_usb = NULL;
gser->ioport = NULL;
if (port->port.count > 0) {
@@ -1431,10 +1435,6 @@ void gserial_disconnect(struct gserial *gser)
spin_unlock(&port->port_lock);
spin_unlock_irqrestore(&serial_port_lock, flags);
- /* disable endpoints, aborting down any active I/O */
- usb_ep_disable(gser->out);
- usb_ep_disable(gser->in);
-
/* finally, free any unused/unusable I/O buffers */
spin_lock_irqsave(&port->port_lock, flags);
if (port->port.count == 0)
--
2.39.0
