Re: [PATCH v6 0/5] Fix USB suspend on TI J7200 (cdns3-ti, cdns3, xhci)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Peter,

On Sat Dec 14, 2024 at 10:06 AM CET, Peter Chen wrote:
> On 24-12-10 18:13:34, Théo Lebrun wrote:
> > Currently, system-wide suspend is broken on J7200 because of a
> > controller reset. The TI wrapper does not get re-initialised at resume
> > and the first register access from cdns core fails.
> > 
> > We address that in two ways:
> > 
> >  - In the cdns3-ti wrapper, if a reset has occured at resume,
> >    we reconfigure the hardware.
> > 
> >  - We add a xhci->lost_power flag. Identical to the XHCI_RESET_ON_RESUME
> >    quirk, expect that it can be set at runtime.
> > 
> >    At resume, to summarise, we do:
> >       xhci->lost_power = cdns_power_is_lost(cdns);
>
> Is it possible you go to change xhci quirks runtime?

I always assumed quirks were read-only once probe was finished.
If I was wrong then we can remove xhci->lost_power and edit
xhci->quirks instead.

Thanks,

--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com






[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux