Re: [PATCH v2] usb: dwc3: imx8mp: fix software node kernel dump

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 26, 2024, Xu Yang wrote:
> When unbind and bind the device again, kernel will dump below warning:
> 
> [  173.972130] sysfs: cannot create duplicate filename '/devices/platform/soc/4c010010.usb/software_node'
> [  173.981564] CPU: 2 UID: 0 PID: 536 Comm: sh Not tainted 6.12.0-rc6-06344-g2aed7c4a5c56 #144
> [  173.989923] Hardware name: NXP i.MX95 15X15 board (DT)
> [  173.995062] Call trace:
> [  173.997509]  dump_backtrace+0x90/0xe8
> [  174.001196]  show_stack+0x18/0x24
> [  174.004524]  dump_stack_lvl+0x74/0x8c
> [  174.008198]  dump_stack+0x18/0x24
> [  174.011526]  sysfs_warn_dup+0x64/0x80
> [  174.015201]  sysfs_do_create_link_sd+0xf0/0xf8
> [  174.019656]  sysfs_create_link+0x20/0x40
> [  174.023590]  software_node_notify+0x90/0x100
> [  174.027872]  device_create_managed_software_node+0xec/0x108
> ...
> 
> The '4c010010.usb' device is a platform device created during the initcall
> and is never removed, which causes its associated software node to persist
> indefinitely.
> 
> The existing device_create_managed_software_node() does not provide a
> corresponding removal function.
> 
> Replace device_create_managed_software_node() with the
> device_add_software_node() and device_remove_software_node() pair to ensure
> proper addition and removal of software nodes, addressing this issue.
> 
> Fixes: a9400f1979a0 ("usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode")
> Cc: stable@xxxxxxxxxxxxxxx
> Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
> Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
> 
> ---
> Changes in v2:
>  - add error handling as suggested by Thinh Nguyen
>  - modify commit message as suggested Frank
>  - add Rb-tag
> ---
>  drivers/usb/dwc3/dwc3-imx8mp.c | 30 ++++++++++++++++--------------
>  1 file changed, 16 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
> index 356812cbcd88..3edc5aca76f9 100644
> --- a/drivers/usb/dwc3/dwc3-imx8mp.c
> +++ b/drivers/usb/dwc3/dwc3-imx8mp.c
> @@ -129,6 +129,16 @@ static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx)
>  	writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL);
>  }
>  
> +static const struct property_entry dwc3_imx8mp_properties[] = {
> +	PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk"),
> +	PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk"),
> +	{},
> +};
> +
> +static const struct software_node dwc3_imx8mp_swnode = {
> +	.properties = dwc3_imx8mp_properties,
> +};
> +
>  static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
>  {
>  	struct dwc3_imx8mp	*dwc3_imx = _dwc3_imx;
> @@ -148,17 +158,6 @@ static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
>  	return IRQ_HANDLED;
>  }
>  
> -static int dwc3_imx8mp_set_software_node(struct device *dev)
> -{
> -	struct property_entry props[3] = { 0 };
> -	int prop_idx = 0;
> -
> -	props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-missing-cas-quirk");
> -	props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-skip-phy-init-quirk");
> -
> -	return device_create_managed_software_node(dev, props, NULL);
> -}
> -
>  static int dwc3_imx8mp_probe(struct platform_device *pdev)
>  {
>  	struct device		*dev = &pdev->dev;
> @@ -221,17 +220,17 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
>  	if (err < 0)
>  		goto disable_rpm;
>  
> -	err = dwc3_imx8mp_set_software_node(dev);
> +	err = device_add_software_node(dev, &dwc3_imx8mp_swnode);
>  	if (err) {
>  		err = -ENODEV;
> -		dev_err(dev, "failed to create software node\n");
> +		dev_err(dev, "failed to add software node\n");
>  		goto disable_rpm;
>  	}
>  
>  	err = of_platform_populate(node, NULL, NULL, dev);
>  	if (err) {
>  		dev_err(&pdev->dev, "failed to create dwc3 core\n");
> -		goto disable_rpm;
> +		goto remove_swnode;
>  	}
>  
>  	dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
> @@ -255,6 +254,8 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
>  
>  depopulate:
>  	of_platform_depopulate(dev);
> +remove_swnode:
> +	device_remove_software_node(dev);
>  disable_rpm:
>  	pm_runtime_disable(dev);
>  	pm_runtime_put_noidle(dev);
> @@ -268,6 +269,7 @@ static void dwc3_imx8mp_remove(struct platform_device *pdev)
>  
>  	pm_runtime_get_sync(dev);
>  	of_platform_depopulate(dev);
> +	device_remove_software_node(dev);
>  
>  	pm_runtime_disable(dev);
>  	pm_runtime_put_noidle(dev);
> -- 
> 2.34.1
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

Thanks,
Thinh




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux