LCUK54-WRD's pid/vid 0x3731/0x010A 0x3731/0x010C LCUK54-WWD's pid/vid 0x3731/0x010B 0x3731/0x010D Above products use the exact same interface layout and option driver: MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=3731 ProdID=0101 Rev= 5.04 S: Manufacturer=NetPrisma S: Product=LCUK54-WRD S: SerialNumber=feeba631 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Mank Wang <mank.wang@xxxxxxxxxxxxx> --- drivers/usb/serial/option.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9ba5584061c8..8acaa7d89493 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2375,6 +2375,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for Golbal EDU */ { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x0116, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010A, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WRD for WWAN Ready */ + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010A, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010A, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010B, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for WWAN Ready */ + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010B, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010B, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010C, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WRD for WWAN Ready */ + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010C, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010C, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010D, 0xff, 0xff, 0x30) }, /* NetPrisma LCUK54-WWD for WWAN Ready */ + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010D, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x3731, 0x010D, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, -- 2.43.0
<<attachment: winmail.dat>>