[PATCH RESEND] USB: serial: CH341: add hardware flow control RTS/CTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds support for enabling and disabling
RTS/CTS hardware flow control.
Tested using a CH340E in combination with a CP2102.

Fixes part of the following bug report:
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197109

Signed-off-by: Lode Willems <me@xxxxxxxxxxxxxxx>
---
 drivers/usb/serial/ch341.c | 41 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index d10e4c4848a0..62237f657320 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -63,6 +63,7 @@
 #define CH341_REG_DIVISOR      0x13
 #define CH341_REG_LCR          0x18
 #define CH341_REG_LCR2         0x25
+#define CH341_REG_FLOW_CTL     0x27
 
 #define CH341_NBREAK_BITS      0x01
 
@@ -77,6 +78,9 @@
 #define CH341_LCR_CS6          0x01
 #define CH341_LCR_CS5          0x00
 
+#define CH341_FLOW_CTL_NONE    0x000
+#define CH341_FLOW_CTL_RTSCTS  0x101
+
 #define CH341_QUIRK_LIMITED_PRESCALER	BIT(0)
 #define CH341_QUIRK_SIMULATE_BREAK	BIT(1)
 
@@ -478,6 +482,41 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 	return r;
 }
 
+static void ch341_set_flow_control(struct tty_struct *tty,
+				   struct usb_serial_port *port,
+				   const struct ktermios *old_termios)
+{
+	int r;
+
+	if (old_termios &&
+	    C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS))
+		return;
+
+	if (C_CRTSCTS(tty)) {
+		r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
+				      CH341_REG_FLOW_CTL |
+				      ((u16)CH341_REG_FLOW_CTL << 8),
+				      CH341_FLOW_CTL_RTSCTS);
+		if (r < 0) {
+			dev_err(&port->dev,
+				"%s - failed to enable flow control: %d\n",
+				__func__, r);
+			tty->termios.c_cflag &= ~CRTSCTS;
+		}
+	} else {
+		r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
+				      CH341_REG_FLOW_CTL |
+				      ((u16)CH341_REG_FLOW_CTL << 8),
+				      CH341_FLOW_CTL_NONE);
+		if (r < 0) {
+			dev_err(&port->dev,
+				"%s - failed to disable flow control: %d\n",
+				__func__, r);
+			tty->termios.c_cflag |= CRTSCTS;
+		}
+	}
+}
+
 /* Old_termios contains the original termios settings and
  * tty->termios contains the new setting to be used.
  */
@@ -546,6 +585,8 @@ static void ch341_set_termios(struct tty_struct *tty,
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	ch341_set_handshake(port->serial->dev, priv->mcr);
+
+	ch341_set_flow_control(tty, port, old_termios);
 }
 
 /*
-- 
2.47.0





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux