Add the phy init sequence for the Super Speed ports found
on IPQ5424.
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
v2: Change uppercase hexdigits to lowercase
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 28 +++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index c52655a383ce..2d8fe9bc40f9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -151,6 +151,21 @@ static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
};
+static const struct qusb2_phy_init_tbl ipq5424_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x00),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc3),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
+};
+
static const unsigned int ipq6018_regs_layout[] = {
[QUSB2PHY_PLL_STATUS] = 0x38,
[QUSB2PHY_PORT_TUNE1] = 0x80,
@@ -331,6 +346,16 @@ static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
.autoresume_en = BIT(0),
};
+static const struct qusb2_phy_cfg ipq5424_phy_cfg = {
+ .tbl = ipq5424_init_tbl,
+ .tbl_num = ARRAY_SIZE(ipq5424_init_tbl),
+ .regs = ipq6018_regs_layout,
+
+ .disable_ctrl = POWER_DOWN,
+ .mask_core_ready = PLL_LOCKED,
+ .autoresume_en = BIT(0),
+};
+
static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
.tbl = qusb2_v2_init_tbl,
.tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl),
@@ -905,6 +930,9 @@ static const struct phy_ops qusb2_phy_gen_ops = {
static const struct of_device_id qusb2_phy_of_match_table[] = {
{
+ .compatible = "qcom,ipq5424-qusb2-phy",
+ .data = &ipq5424_phy_cfg,
+ }, {
.compatible = "qcom,ipq6018-qusb2-phy",
.data = &ipq6018_phy_cfg,
}, {
--
2.34.1
