If the device was already runtime suspended then during system suspend we cannot access the device registers else it will crash. Also we cannot access any registers after dwc3_core_exit() on some platforms so move the dwc3_enable_susphy() call to the top. Cc: stable@xxxxxxxxxxxxxxx # v5.15+ Reported-by: William McVicker <willmcvicker@xxxxxxxxxx> Closes: https://lore.kernel.org/all/ZyVfcUuPq56R2m1Y@xxxxxxxxxx Fixes: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms") Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx> --- drivers/usb/dwc3/core.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 427e5660f87c..98114c2827c0 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -2342,10 +2342,18 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) u32 reg; int i; - dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) & - DWC3_GUSB2PHYCFG_SUSPHY) || - (dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)) & - DWC3_GUSB3PIPECTL_SUSPHY); + if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) { + dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) & + DWC3_GUSB2PHYCFG_SUSPHY) || + (dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)) & + DWC3_GUSB3PIPECTL_SUSPHY); + /* + * TI AM62 platform requires SUSPHY to be + * enabled for system suspend to work. + */ + if (!dwc->susphy_state) + dwc3_enable_susphy(dwc, true); + } switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -2398,15 +2406,6 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) break; } - if (!PMSG_IS_AUTO(msg)) { - /* - * TI AM62 platform requires SUSPHY to be - * enabled for system suspend to work. - */ - if (!dwc->susphy_state) - dwc3_enable_susphy(dwc, true); - } - return 0; } --- base-commit: 42f7652d3eb527d03665b09edac47f85fb600924 change-id: 20241102-am62-lpm-usb-fix-347dd86135c1 Best regards, -- Roger Quadros <rogerq@xxxxxxxxxx>
