On Thu, Oct 31, 2024 at 04:59:52PM -0700, Amit Sunil Dhamne wrote: > This commit adds a new time property for Battery charger (BC1.2) type > detection completion process (based on BCv1.2 detection spec) when > typec port connects in a potential sink role. BC1.2 detection is used > by some Type C port controllers implementations (such as > "maxim,max33359") to detect the type of charger port. > > Signed-off-by: Amit Sunil Dhamne <amitsd@xxxxxxxxxx> > --- > .../devicetree/bindings/connector/usb-connector.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml > index 21a0c58c65cd..67700440e23b 100644 > --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml > @@ -283,6 +283,16 @@ properties: > maximum: 200 > default: 200 > > + sink-bc12-completion-time-ms: > + description: Represents the max time in ms that a port in sink role takes > + to complete Battery Charger (BC1.2) Detection. BC1.2 detection is a > + hardware mechanism, which in some TCPC implementations, can run in > + parallel once the Type-C connection state machine reaches the "potential > + connect as sink" state. In TCPCs where this causes delays to respond to > + the incoming PD messages, sink-bc12-completion-time-ms is used to delay > + PD negotiation till BC1.2 detection completes. > + default: 0 Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Best regards, Krzysztof
