Re: [PATCH v4] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi greg k-h,

在 2024-10-29星期二的 04:27 +0100,Greg KH写道:
> On Thu, Oct 24, 2024 at 04:46:48PM +0800, duanchenghao wrote:
> > hi greg k-h,
> > 
> > 在 2024-10-24星期四的 09:05 +0200,Greg KH写道:
> > > On Thu, Oct 24, 2024 at 10:40:38AM +0800, Duan Chenghao wrote:
> > > > When a device is inserted into the USB port and an S4 wakeup is
> > > > initiated,
> > > > after the USB-hub initialization is completed, it will
> > > > automatically enter
> > > > suspend mode. Upon detecting a device on the USB port, it will
> > > > proceed with
> > > > resume and set the hcd to the HCD_FLAG_WAKEUP_PENDING state.
> > > > During
> > > > the S4
> > > > wakeup process, peripherals are put into suspend mode, followed
> > > > by
> > > > task
> > > > recovery. However, upon detecting that the hcd is in the
> > > > HCD_FLAG_WAKEUP_PENDING state, it will return an EBUSY status,
> > > > causing the
> > > > S4 suspend to fail and subsequent task recovery to not proceed.
> > > > -
> > > > [   27.594598][ 1]  PM: pci_pm_freeze():
> > > > hcd_pci_suspend+0x0/0x28
> > > > returns -16
> > > > [   27.594601][ 1]  PM: dpm_run_callback():
> > > > pci_pm_freeze+0x0/0x100
> > > > returns -16
> > > > [   27.603420][ 1]  ehci-pci 0000:00:04.1:
> > > > pci_pm_freeze+0x0/0x100
> > > > returned 0 after 3 usecs
> > > > [   27.612233][ 1]  ehci-pci 0000:00:05.1:
> > > > pci_pm_freeze+0x0/0x100
> > > > returned -16 after 17223 usecs
> > > > [   27.810067][ 1]  PM: Device 0000:00:05.1 failed to quiesce
> > > > async: error -16
> > > > [   27.816988][ 1]  PM: quiesce of devices aborted after
> > > > 1833.282
> > > > msecs
> > > > [   27.823302][ 1]  PM: start quiesce of devices aborted after
> > > > 1839.975 msecs
> > > > ......
> > > > [   31.303172][ 1]  PM: recover of devices complete after
> > > > 3473.039
> > > > msecs
> > > > [   31.309818][ 1]  PM: Failed to load hibernation image,
> > > > recovering.
> > > > [   31.348188][ 1]  PM: Basic memory bitmaps freed
> > > > [   31.352686][ 1]  OOM killer enabled.
> > > > [   31.356232][ 1]  Restarting tasks ... done.
> > > > [   31.360609][ 1]  PM: resume from hibernation failed (0)
> > > > [   31.365800][ 1]  PM: Hibernation image not present or could
> > > > not
> > > > be loaded.
> > > > 
> > > > The "do_wakeup" is determined based on whether the controller's
> > > > power/wakeup attribute is set. The current issue necessitates
> > > > considering
> > > > the type of suspend that is occurring. If the suspend type is
> > > > either
> > > > PM_EVENT_FREEZE or PM_EVENT_QUIESCE, then "do_wakeup" should be
> > > > set
> > > > to
> > > > false.
> > > > 
> > > > Reported-by: kernel test robot <lkp@xxxxxxxxx>
> > > > Closes:
> > > > https://lore.kernel.org/oe-kbuild-all/202410151722.rfjtknRz-lkp@xxxxxxxxx/
> > > > Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> > > > Signed-off-by: Duan Chenghao <duanchenghao@xxxxxxxxxx>
> > > 
> > > What commit id does this fix?
> > 
> > The current patch is not intended to fix an issue with a specific
> > commit, but rather to address a long-standing problem in the USB
> > core.
> 
> So should it be backported to older stable kernels?  If so, how far
> back?

yes, It needs to be backported. The stable branches such as 6.6.y,
6.10.y, and 6.11.y can be considered for the backport.

Should we backport to these versions?

Thanks 

Duan Chenghao
> 
> > > And I missed where Alan provided a signed-off-by, where was that?
> > 
> > In the following email, Alan proposed using "Signed-off-by" for
> > signing.
> > https://lore.kernel.org/all/489805e7-c19c-4b57-9cd7-713e075261cd@xxxxxxxxxxxxxxxxxxx/
> 
> Ah, missed that, sorry.
> 
> thanks,
> 
> greg k-h






[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux