Describe the Texas Instruments TUSB1046-DCI USB Type-C linear redriver crosspoint switch. This component is used to handle orientation switching and DisplayPort altmode multiplexing for Type-C signals. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Signed-off-by: Romain Gantois <romain.gantois@xxxxxxxxxxx> --- .../devicetree/bindings/usb/ti,tusb1046.yaml | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml new file mode 100644 index 0000000000000000000000000000000000000000..f713cac4a8ac8e89c017999bc11e4b3a38d3ac2e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,tusb1046.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TUSB1046-DCI Type-C crosspoint switch + +maintainers: + - Romain Gantois <romain.gantois@xxxxxxxxxxx> + +allOf: + - $ref: usb-switch.yaml# + +properties: + compatible: + const: ti,tusb1046 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - port + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@44 { + compatible = "ti,tusb1046"; + reg = <0x44>; + + mode-switch; + orientation-switch; + + port { + endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... -- 2.47.0
