Hi Alan, The current patch has been tested on 6 machines and has passed the tests, with each machine undergoing 500 cycles of testing. Saranya also replied in the email that she conducted 1,500 tests and all were successful. Thanks Duan Chenghao 在 2024-10-24星期四的 10:40 +0800，Duan Chenghao写道： > When a device is inserted into the USB port and an S4 wakeup is > initiated, > after the USB-hub initialization is completed, it will automatically > enter > suspend mode. Upon detecting a device on the USB port, it will > proceed with > resume and set the hcd to the HCD_FLAG_WAKEUP_PENDING state. During > the S4 > wakeup process, peripherals are put into suspend mode, followed by > task > recovery. However, upon detecting that the hcd is in the > HCD_FLAG_WAKEUP_PENDING state, it will return an EBUSY status, > causing the > S4 suspend to fail and subsequent task recovery to not proceed. > - > [ 27.594598][ 1] PM: pci_pm_freeze(): hcd_pci_suspend+0x0/0x28 > returns -16 > [ 27.594601][ 1] PM: dpm_run_callback(): pci_pm_freeze+0x0/0x100 > returns -16 > [ 27.603420][ 1] ehci-pci 0000:00:04.1: pci_pm_freeze+0x0/0x100 > returned 0 after 3 usecs > [ 27.612233][ 1] ehci-pci 0000:00:05.1: pci_pm_freeze+0x0/0x100 > returned -16 after 17223 usecs > [ 27.810067][ 1] PM: Device 0000:00:05.1 failed to quiesce async: > error -16 > [ 27.816988][ 1] PM: quiesce of devices aborted after 1833.282 > msecs > [ 27.823302][ 1] PM: start quiesce of devices aborted after > 1839.975 msecs > ...... > [ 31.303172][ 1] PM: recover of devices complete after 3473.039 > msecs > [ 31.309818][ 1] PM: Failed to load hibernation image, recovering. > [ 31.348188][ 1] PM: Basic memory bitmaps freed > [ 31.352686][ 1] OOM killer enabled. > [ 31.356232][ 1] Restarting tasks ... done. > [ 31.360609][ 1] PM: resume from hibernation failed (0) > [ 31.365800][ 1] PM: Hibernation image not present or could not be > loaded. > > The "do_wakeup" is determined based on whether the controller's > power/wakeup attribute is set. The current issue necessitates > considering > the type of suspend that is occurring. If the suspend type is either > PM_EVENT_FREEZE or PM_EVENT_QUIESCE, then "do_wakeup" should be set > to > false. > > Reported-by: kernel test robot <lkp@xxxxxxxxx> > Closes: > https://lore.kernel.org/oe-kbuild-all/202410151722.rfjtknRz-lkp@xxxxxxxxx/ > Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> > Signed-off-by: Duan Chenghao <duanchenghao@xxxxxxxxxx> > --- > drivers/usb/core/hcd-pci.c | 15 +++++++++++++-- > include/linux/pm.h | 3 ++- > 2 files changed, 15 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c > index a08f3f228e6d..390b1225f3cc 100644 > --- a/drivers/usb/core/hcd-pci.c > +++ b/drivers/usb/core/hcd-pci.c > @@ -422,7 +422,12 @@ static int suspend_common(struct device *dev, > pm_message_t msg) > bool do_wakeup; > int retval; > > - do_wakeup = PMSG_IS_AUTO(msg) ? true : > device_may_wakeup(dev); > + if (PMSG_IS_AUTO(msg)) > + do_wakeup = true; > + else if (PMSG_NO_WAKEUP(msg)) > + do_wakeup = false; > + else > + do_wakeup = device_may_wakeup(dev); > > /* Root hub suspend should have stopped all downstream > traffic, > * and all bus master traffic. And done so for both the > interface > @@ -521,6 +526,11 @@ static int hcd_pci_suspend(struct device *dev) > return suspend_common(dev, PMSG_SUSPEND); > } > > +static int hcd_pci_freeze(struct device *dev) > +{ > + return suspend_common(dev, PMSG_FREEZE); > +} > + > static int hcd_pci_suspend_noirq(struct device *dev) > { > struct pci_dev *pci_dev = to_pci_dev(dev); > @@ -590,6 +600,7 @@ static int hcd_pci_restore(struct device *dev) > #else > > #define hcd_pci_suspend NULL > +#define hcd_pci_freeze NULL > #define hcd_pci_suspend_noirq NULL > #define hcd_pci_poweroff_late NULL > #define hcd_pci_resume_noirq NULL > @@ -624,7 +635,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = { > .suspend_noirq = hcd_pci_suspend_noirq, > .resume_noirq = hcd_pci_resume_noirq, > .resume = hcd_pci_resume, > - .freeze = hcd_pci_suspend, > + .freeze = hcd_pci_freeze, > .freeze_noirq = check_root_hub_suspended, > .thaw_noirq = NULL, > .thaw = hcd_pci_resume, > diff --git a/include/linux/pm.h b/include/linux/pm.h > index 97b0e23363c8..2a676b2cb699 100644 > --- a/include/linux/pm.h > +++ b/include/linux/pm.h > @@ -570,7 +570,8 @@ const struct dev_pm_ops name = { \ > { .event = > PM_EVENT_AUTO_RESUME, }) > > #define PMSG_IS_AUTO(msg) (((msg).event & PM_EVENT_AUTO) != 0) > - > +#define PMSG_NO_WAKEUP(msg) (((msg).event & \ > + (PM_EVENT_FREEZE | PM_EVENT_QUIESCE)) > != 0) > /* > * Device run-time power management status. > *
