https://bugzilla.kernel.org/show_bug.cgi?id=219422 Bug ID: 219422 Summary: Hard crash when USB4 cable is disconnected during sleep Product: Drivers Version: 2.5 Hardware: All OS: Linux Status: NEW Severity: normal Priority: P3 Component: USB Assignee: drivers_usb@xxxxxxxxxxxxxxxxxxxxxx Reporter: me@xxxxxx Regression: No Created attachment 307062 --> https://bugzilla.kernel.org/attachment.cgi?id=307062&action=edit Error after USB4 cable is disconnected and Hi, my current setup is a Lenovo Legion Go with a USB4 based external GPU (Onex GPU with a 7600M XT). I am running these tests on EndeavorOS with 6.12 rc4 kernel and stock 6.11.2-arch kernel. My device crashes and hard locks when the USB4 cable is disconnected or when the device is not inaccessible upon a sleep and wake cycle. I have been able to reliably crash system with this external GPU with the following steps: 1. Connect my eGPU dock 2. Wait a few seconds 3. Put the device to sleep 4. Wait for the device to sleep 5. Disconnect the USB4 cable 6. Wake the device up and the system will hard lock I attached a photo of the logs. The error message is: 'Unable to change power state from Dcold to DO, device inaccessible' and this occurs for all PCI devices on the USB4 dock. The above also occurs intermittently even when I have the cable attached. To isolate if it was my device or the USB4 eGPU enclosure, I have also tried a Thunderbolt 3 laptop dock and that works reliably. I am able to disconnect the TB3 device during sleep and my system successfully recovers. -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
