[PATCH v3 2/4] usb: typec: Add support for Parade PS8830 Type-C Retimer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Parade PS8830 is a Type-C muti-protocol retimer controlled over I2C.
It provides both altmode and orientation handling.

Add a driver with support for the following modes:
 - DP 4lanes
 - DP 2lanes + USB3
 - USB3

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
 drivers/usb/typec/mux/Kconfig  |  10 +
 drivers/usb/typec/mux/Makefile |   1 +
 drivers/usb/typec/mux/ps8830.c | 423 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 434 insertions(+)

diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index ce7db6ad30572a0a74890f5f11944fb3ff07f635..48613b67f1c5dacd14d54baf91c3066377cf97be 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -56,6 +56,16 @@ config TYPEC_MUX_NB7VPQ904M
 	  Say Y or M if your system has a On Semiconductor NB7VPQ904M Type-C
 	  redriver chip found on some devices with a Type-C port.
 
+config TYPEC_MUX_PS8830
+	tristate "Parade PS8830 Type-C retimer driver"
+	depends on I2C
+	depends on DRM || DRM=n
+	select DRM_AUX_BRIDGE if DRM_BRIDGE && OF
+	select REGMAP_I2C
+	help
+	  Say Y or M if your system has a Parade PS8830 Type-C retimer chip
+	  found on some devices with a Type-C port.
+
 config TYPEC_MUX_PTN36502
 	tristate "NXP PTN36502 Type-C redriver driver"
 	depends on I2C
diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
index bb96f30267af05b33b9277dcf1cc0e1527d2dcdd..4b23b12cfe45a0ff8a37f38c7ba050f572d556e7 100644
--- a/drivers/usb/typec/mux/Makefile
+++ b/drivers/usb/typec/mux/Makefile
@@ -6,5 +6,6 @@ obj-$(CONFIG_TYPEC_MUX_PI3USB30532)	+= pi3usb30532.o
 obj-$(CONFIG_TYPEC_MUX_INTEL_PMC)	+= intel_pmc_mux.o
 obj-$(CONFIG_TYPEC_MUX_IT5205)		+= it5205.o
 obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M)	+= nb7vpq904m.o
+obj-$(CONFIG_TYPEC_MUX_PS8830)		+= ps8830.o
 obj-$(CONFIG_TYPEC_MUX_PTN36502)	+= ptn36502.o
 obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS)	+= wcd939x-usbss.o
diff --git a/drivers/usb/typec/mux/ps8830.c b/drivers/usb/typec/mux/ps8830.c
new file mode 100644
index 0000000000000000000000000000000000000000..df83b2f3b562aec3794a27ca643325898c45c6ae
--- /dev/null
+++ b/drivers/usb/typec/mux/ps8830.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Parade PS8830 usb retimer driver
+ *
+ * Copyright (C) 2024 Linaro Ltd.
+ */
+
+#include <drm/bridge/aux-bridge.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/usb/typec_retimer.h>
+
+struct ps8830_retimer {
+	struct i2c_client *client;
+	struct gpio_desc *reset_gpio;
+	struct regmap *regmap;
+	struct typec_switch_dev *sw;
+	struct typec_retimer *retimer;
+	struct clk *xo_clk;
+	struct regulator *vdd_supply;
+	struct regulator *vdd33_supply;
+	struct regulator *vdd33_cap_supply;
+	struct regulator *vddat_supply;
+	struct regulator *vddar_supply;
+	struct regulator *vddio_supply;
+
+	struct typec_switch *typec_switch;
+	struct typec_mux *typec_mux;
+
+	struct mutex lock; /* protect non-concurrent retimer & switch */
+
+	enum typec_orientation orientation;
+	unsigned long mode;
+	unsigned int svid;
+};
+
+static void ps8830_write(struct ps8830_retimer *retimer, int cfg0, int cfg1, int cfg2)
+{
+	regmap_write(retimer->regmap, 0x0, cfg0);
+	regmap_write(retimer->regmap, 0x1, cfg1);
+	regmap_write(retimer->regmap, 0x2, cfg2);
+}
+
+static void ps8830_configure(struct ps8830_retimer *retimer, int cfg0, int cfg1, int cfg2)
+{
+	/* Write safe-mode config before switching to new config */
+	ps8830_write(retimer, 0x1, 0x0, 0x0);
+
+	ps8830_write(retimer, cfg0, cfg1, cfg2);
+}
+
+static int ps8380_set(struct ps8830_retimer *retimer)
+{
+	int cfg0 = 0x00;
+	int cfg1 = 0x00;
+	int cfg2 = 0x00;
+
+	if (retimer->orientation == TYPEC_ORIENTATION_NONE ||
+	    retimer->mode == TYPEC_STATE_SAFE) {
+		ps8830_write(retimer, 0x1, 0x0, 0x0);
+		return 0;
+	}
+
+	if (retimer->mode != TYPEC_STATE_USB && retimer->svid != USB_TYPEC_DP_SID)
+		return -EINVAL;
+
+	if (retimer->orientation == TYPEC_ORIENTATION_NORMAL)
+		cfg0 = 0x01;
+	else
+		cfg0 = 0x03;
+
+	switch (retimer->mode) {
+	case TYPEC_STATE_USB:
+		cfg0 |= 0x20;
+		break;
+
+	case TYPEC_DP_STATE_C:
+		cfg1 = 0x85;
+		break;
+
+	case TYPEC_DP_STATE_D:
+		cfg0 |= 0x20;
+		cfg1 = 0x85;
+		break;
+
+	case TYPEC_DP_STATE_E:
+		cfg1 = 0x81;
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	ps8830_configure(retimer, cfg0, cfg1, cfg2);
+
+	return 0;
+}
+
+static int ps8830_sw_set(struct typec_switch_dev *sw,
+			 enum typec_orientation orientation)
+{
+	struct ps8830_retimer *retimer = typec_switch_get_drvdata(sw);
+	int ret = 0;
+
+	ret = typec_switch_set(retimer->typec_switch, orientation);
+	if (ret)
+		return ret;
+
+	mutex_lock(&retimer->lock);
+
+	if (retimer->orientation != orientation) {
+		retimer->orientation = orientation;
+
+		ret = ps8380_set(retimer);
+	}
+
+	mutex_unlock(&retimer->lock);
+
+	return ret;
+}
+
+static int ps8830_retimer_set(struct typec_retimer *rtmr,
+			      struct typec_retimer_state *state)
+{
+	struct ps8830_retimer *retimer = typec_retimer_get_drvdata(rtmr);
+	struct typec_mux_state mux_state;
+	int ret = 0;
+
+	mutex_lock(&retimer->lock);
+
+	if (state->mode != retimer->mode) {
+		retimer->mode = state->mode;
+
+		if (state->alt)
+			retimer->svid = state->alt->svid;
+		else
+			retimer->svid = 0; // No SVID
+
+		ret = ps8380_set(retimer);
+	}
+
+	mutex_unlock(&retimer->lock);
+
+	if (ret)
+		return ret;
+
+	mux_state.alt = state->alt;
+	mux_state.data = state->data;
+	mux_state.mode = state->mode;
+
+	return typec_mux_set(retimer->typec_mux, &mux_state);
+}
+
+static int ps8830_enable_vregs(struct ps8830_retimer *retimer)
+{
+	struct device *dev = &retimer->client->dev;
+	int ret;
+
+	ret = regulator_enable(retimer->vdd33_supply);
+	if (ret) {
+		dev_err(dev, "cannot enable VDD 3.3V regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(retimer->vdd33_cap_supply);
+	if (ret) {
+		dev_err(dev, "cannot enable VDD 3.3V CAP regulator: %d\n", ret);
+		goto err_vdd33_disable;
+	}
+
+	usleep_range(4000, 10000);
+
+	ret = regulator_enable(retimer->vdd_supply);
+	if (ret) {
+		dev_err(dev, "cannot enable VDD regulator: %d\n", ret);
+		goto err_vdd33_cap_disable;
+	}
+
+	ret = regulator_enable(retimer->vddar_supply);
+	if (ret) {
+		dev_err(dev, "cannot enable VDD AR regulator: %d\n", ret);
+		goto err_vdd_disable;
+	}
+
+	ret = regulator_enable(retimer->vddat_supply);
+	if (ret) {
+		dev_err(dev, "cannot enable VDD AT regulator: %d\n", ret);
+		goto err_vddar_disable;
+	}
+
+	ret = regulator_enable(retimer->vddio_supply);
+	if (ret) {
+		dev_err(dev, "cannot enable VDD IO regulator: %d\n", ret);
+		goto err_vddat_disable;
+	}
+
+	return 0;
+
+err_vddat_disable:
+	regulator_disable(retimer->vddat_supply);
+err_vddar_disable:
+	regulator_disable(retimer->vddar_supply);
+err_vdd_disable:
+	regulator_disable(retimer->vdd_supply);
+err_vdd33_cap_disable:
+	regulator_disable(retimer->vdd33_cap_supply);
+err_vdd33_disable:
+	regulator_disable(retimer->vdd33_supply);
+
+	return ret;
+}
+
+static int ps8830_get_vregs(struct ps8830_retimer *retimer)
+{
+	struct device *dev = &retimer->client->dev;
+
+	retimer->vdd_supply = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(retimer->vdd_supply))
+		return dev_err_probe(dev, PTR_ERR(retimer->vdd_supply),
+				     "failed to get VDD\n");
+
+	retimer->vdd33_supply = devm_regulator_get(dev, "vdd33");
+	if (IS_ERR(retimer->vdd33_supply))
+		return dev_err_probe(dev, PTR_ERR(retimer->vdd33_supply),
+				     "failed to get VDD 3.3V\n");
+
+	retimer->vdd33_cap_supply = devm_regulator_get(dev, "vdd33-cap");
+	if (IS_ERR(retimer->vdd33_cap_supply))
+		return dev_err_probe(dev, PTR_ERR(retimer->vdd33_cap_supply),
+				     "failed to get VDD CAP 3.3V\n");
+
+	retimer->vddat_supply = devm_regulator_get(dev, "vddat");
+	if (IS_ERR(retimer->vddat_supply))
+		return dev_err_probe(dev, PTR_ERR(retimer->vddat_supply),
+				     "failed to get VDD AT\n");
+
+	retimer->vddar_supply = devm_regulator_get(dev, "vddar");
+	if (IS_ERR(retimer->vddar_supply))
+		return dev_err_probe(dev, PTR_ERR(retimer->vddar_supply),
+				     "failed to get VDD AR\n");
+
+	retimer->vddio_supply = devm_regulator_get(dev, "vddio");
+	if (IS_ERR(retimer->vddio_supply))
+		return dev_err_probe(dev, PTR_ERR(retimer->vddio_supply),
+				     "failed to get VDD IO\n");
+
+	return 0;
+}
+
+static const struct regmap_config ps8830_retimer_regmap = {
+	.max_register = 0x1f,
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static int ps8830_retimer_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct typec_switch_desc sw_desc = { };
+	struct typec_retimer_desc rtmr_desc = { };
+	struct ps8830_retimer *retimer;
+	bool skip_reset = false;
+	int ret;
+
+	retimer = devm_kzalloc(dev, sizeof(*retimer), GFP_KERNEL);
+	if (!retimer)
+		return -ENOMEM;
+
+	retimer->client = client;
+
+	mutex_init(&retimer->lock);
+
+	if (of_property_read_bool(dev->of_node, "ps8830,boot-on"))
+		skip_reset = true;
+
+	retimer->regmap = devm_regmap_init_i2c(client, &ps8830_retimer_regmap);
+	if (IS_ERR(retimer->regmap)) {
+		ret = PTR_ERR(retimer->regmap);
+		dev_err(dev, "failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	ret = ps8830_get_vregs(retimer);
+	if (ret)
+		return ret;
+
+	retimer->xo_clk = devm_clk_get(dev, "xo");
+	if (IS_ERR(retimer->xo_clk))
+		return dev_err_probe(dev, PTR_ERR(retimer->xo_clk),
+				     "failed to get xo clock\n");
+
+	retimer->reset_gpio = devm_gpiod_get(dev, "reset",
+					     skip_reset ? GPIOD_OUT_LOW : GPIOD_OUT_HIGH);
+	if (IS_ERR(retimer->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(retimer->reset_gpio),
+				     "failed to get reset gpio\n");
+
+	retimer->typec_switch = fwnode_typec_switch_get(dev->fwnode);
+	if (IS_ERR(retimer->typec_switch))
+		return dev_err_probe(dev, PTR_ERR(retimer->typec_switch),
+				     "failed to acquire orientation-switch\n");
+
+	retimer->typec_mux = fwnode_typec_mux_get(dev->fwnode);
+	if (IS_ERR(retimer->typec_mux)) {
+		ret = dev_err_probe(dev, PTR_ERR(retimer->typec_mux),
+				    "failed to acquire mode-mux\n");
+		goto err_switch_put;
+	}
+
+	sw_desc.drvdata = retimer;
+	sw_desc.fwnode = dev_fwnode(dev);
+	sw_desc.set = ps8830_sw_set;
+
+	ret = drm_aux_bridge_register(dev);
+	if (ret)
+		goto err_mux_put;
+
+	retimer->sw = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(retimer->sw)) {
+		ret = PTR_ERR(retimer->sw);
+		dev_err(dev, "failed to register typec switch: %d\n", ret);
+		goto err_aux_bridge_unregister;
+	}
+
+	rtmr_desc.drvdata = retimer;
+	rtmr_desc.fwnode = dev_fwnode(dev);
+	rtmr_desc.set = ps8830_retimer_set;
+
+	retimer->retimer = typec_retimer_register(dev, &rtmr_desc);
+	if (IS_ERR(retimer->retimer)) {
+		ret = PTR_ERR(retimer->retimer);
+		dev_err(dev, "failed to register typec retimer: %d\n", ret);
+		goto err_switch_unregister;
+	}
+
+	ret = clk_prepare_enable(retimer->xo_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable XO: %d\n", ret);
+		goto err_retimer_unregister;
+	}
+
+	ret = ps8830_enable_vregs(retimer);
+	if (ret)
+		goto err_clk_disable;
+
+	/* delay needed as per datasheet */
+	usleep_range(4000, 14000);
+
+	if (!skip_reset)
+		gpiod_set_value(retimer->reset_gpio, 0);
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(retimer->xo_clk);
+err_retimer_unregister:
+	typec_retimer_unregister(retimer->retimer);
+err_switch_unregister:
+	typec_switch_unregister(retimer->sw);
+err_aux_bridge_unregister:
+	if (!skip_reset)
+		gpiod_set_value(retimer->reset_gpio, 1);
+
+	clk_disable_unprepare(retimer->xo_clk);
+err_mux_put:
+	typec_mux_put(retimer->typec_mux);
+err_switch_put:
+	typec_switch_put(retimer->typec_switch);
+
+	return ret;
+}
+
+static void ps8830_retimer_remove(struct i2c_client *client)
+{
+	struct ps8830_retimer *retimer = i2c_get_clientdata(client);
+
+	typec_retimer_unregister(retimer->retimer);
+	typec_switch_unregister(retimer->sw);
+
+	gpiod_set_value(retimer->reset_gpio, 1);
+
+	regulator_disable(retimer->vddio_supply);
+	regulator_disable(retimer->vddat_supply);
+	regulator_disable(retimer->vddar_supply);
+	regulator_disable(retimer->vdd_supply);
+	regulator_disable(retimer->vdd33_cap_supply);
+	regulator_disable(retimer->vdd33_supply);
+
+	clk_disable_unprepare(retimer->xo_clk);
+
+	typec_mux_put(retimer->typec_mux);
+	typec_switch_put(retimer->typec_switch);
+}
+
+static const struct of_device_id ps8830_retimer_of_table[] = {
+	{ .compatible = "parade,ps8830" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ps8830_retimer_of_table);
+
+static struct i2c_driver ps8830_retimer_driver = {
+	.driver = {
+		.name = "ps8830_retimer",
+		.of_match_table = ps8830_retimer_of_table,
+	},
+	.probe		= ps8830_retimer_probe,
+	.remove		= ps8830_retimer_remove,
+};
+
+module_i2c_driver(ps8830_retimer_driver);
+
+MODULE_DESCRIPTION("Parade PS8830 Type-C Retimer driver");
+MODULE_LICENSE("GPL");

-- 
2.34.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux