On Thu, Oct 17, 2024, Akash Kumar wrote:
> The current logic is rigid, setting num_fifos to fixed values.
> 3 for any maxburst greater than 1.
> tx_fifo_resize_max_num for maxburst greater than 6.
> Additionally, it did not differentiate much between bulk and
> isochronous transfers, applying similar logic to both.
>
> The updated logic is more flexible and specifically designed to meet
> the unique requirements of both bulk and isochronous transfers. We
> have made every effort to satisfy all needs and requirements, verified
> on our specific platform and application.
>
> Bulk Transfers: Ensures that num_fifos is optimized by considering both
> the maxburst and DT property "tx-fifo-max-num" for super speed and
> above. For high-speed and below bulk endpoints, a 2K TxFIFO allocation
> is used to meet efficient data transfer needs, considering
> FIFO-constrained platforms.
>
> Isochronous Transfers: Ensures that num_fifos is sufficient by
> considering the maximum packet multiplier for HS and below and maxburst
> for Super-speed and above eps, along with a constraint with the DT
> property "tx-fifo-max-num".
>
> This change aims to optimize the allocation of Tx FIFOs for both bulk
> and isochronous endpoints, potentially improving data transfer efficiency
> and overall performance. It also enhances support for all use cases,
> which can be tweaked with DT parameters and the endpoint’s maxburst and
> maxpacket. This structured approach ensures that the appropriate number
> of FIFOs is allocated based on the endpoint type and USB speed.
>
> Signed-off-by: Akash Kumar <quic_akakum@xxxxxxxxxxx>
> ---
> Changes for v7:
> fixed indentations for if checks.
>
> Changes for v6:
> The code has been refactored to replace multiple if checks with a
> switch-case structure based on the USB speed. This change improves
> readability and maintainability by clearly defining behavior for
> different USB speeds. This structured approach ensures that the
> appropriate number of FIFOs is allocated based on the endpoint
> type and USB speed.
>
> Changes for v5:
> Update Calculation for HS and below bulk and isoc eps based on
> suggestion and fixed at 2k for bulk eps considering fifo constrained
> platforms.
>
> Changes for v4:
> Updated commit message as per review comments to clarify that it has
> been tested on specific platforms only and tried best to match all
> expectations.
>
> Changes for v3:
> Redefine logic for resizing tx fifos,added check based on operating
> speed and used maxp for HS and maxburst for SS and defined max allocation
> based on dt property.
>
> Changes for v2:
> Redefine logic for resizing tx fifos, handled fifo based on minimum of
> maxp and maxburts.
>
> Changes for v1:
> Added additional condition to allocate tx fifo for hs isoc eps, keeping
> the other resize logic same
> ---
> drivers/usb/dwc3/gadget.c | 33 ++++++++++++++++++++++++---------
> 1 file changed, 24 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 10178e5eda5a..af3d5b2f7b67 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -771,15 +771,30 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
>
> ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
>
> - if ((dep->endpoint.maxburst > 1 &&
> - usb_endpoint_xfer_bulk(dep->endpoint.desc)) ||
> - usb_endpoint_xfer_isoc(dep->endpoint.desc))
> - num_fifos = 3;
> -
> - if (dep->endpoint.maxburst > 6 &&
> - (usb_endpoint_xfer_bulk(dep->endpoint.desc) ||
> - usb_endpoint_xfer_isoc(dep->endpoint.desc)) && DWC3_IP_IS(DWC31))
> - num_fifos = dwc->tx_fifo_resize_max_num;
> + switch (dwc->gadget->speed) {
> + case USB_SPEED_SUPER_PLUS:
> + case USB_SPEED_SUPER:
> + if (usb_endpoint_xfer_bulk(dep->endpoint.desc) ||
> + usb_endpoint_xfer_isoc(dep->endpoint.desc))
> + num_fifos = min_t(unsigned int,
> + dep->endpoint.maxburst,
> + dwc->tx_fifo_resize_max_num);
> + break;
> + case USB_SPEED_HIGH:
> + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
> + num_fifos = min_t(unsigned int,
> + usb_endpoint_maxp_mult(dep->endpoint.desc) + 1,
> + dwc->tx_fifo_resize_max_num);
> + break;
> + }
> + fallthrough;
> + case USB_SPEED_FULL:
> + if (usb_endpoint_xfer_bulk(dep->endpoint.desc))
> + num_fifos = 2;
> + break;
> + default:
> + break;
> + }
>
> /* FIFO size for a single buffer */
> fifo = dwc3_gadget_calc_tx_fifo_size(dwc, 1);
> --
> 2.17.1
Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
Thanks,
Thinh
