UCSI does not share the contents of the Enter_USB Message
that was used, so the active mode still has to be always
determined from the enumerated USB device. However, after
UCSI v2.0 it is possible to check separately is USB4 the
active mode.
So with USB2 and USB3 the mode is always determined from the
result of the USB enumeration, and when USB4 USB Mode is
active, UCSI driver can assign the mode directly.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
drivers/usb/typec/ucsi/ucsi.c | 8 ++++++++
drivers/usb/typec/ucsi/ucsi.h | 2 ++
2 files changed, 10 insertions(+)
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 13c739d334c4..804f7f9b35ea 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1057,6 +1057,14 @@ static int ucsi_register_partner(struct ucsi_connector *con)
con->partner = partner;
+ if (con->ucsi->version >= UCSI_VERSION_3_0)
+ if (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) &
+ UCSI_CONSTAT_PARTNER_FLAG_USB4_GEN4)
+ typec_partner_set_usb_mode(partner, USB_MODE_USB4);
+ if (con->ucsi->version >= UCSI_VERSION_2_0)
+ if (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) &
+ UCSI_CONSTAT_PARTNER_FLAG_USB4_GEN3)
+ typec_partner_set_usb_mode(partner, USB_MODE_USB4);
return 0;
}
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index a1f4b9b568c8..d850073e8d0a 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -346,6 +346,8 @@ struct ucsi_connector_status {
#define UCSI_CONSTAT_PARTNER_FLAGS(_f_) (((_f_) & GENMASK(12, 5)) >> 5)
#define UCSI_CONSTAT_PARTNER_FLAG_USB 1
#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE 2
+#define UCSI_CONSTAT_PARTNER_FLAG_USB4_GEN3 4
+#define UCSI_CONSTAT_PARTNER_FLAG_USB4_GEN4 8
#define UCSI_CONSTAT_PARTNER_TYPE(_f_) (((_f_) & GENMASK(15, 13)) >> 13)
#define UCSI_CONSTAT_PARTNER_TYPE_DFP 1
#define UCSI_CONSTAT_PARTNER_TYPE_UFP 2
--
2.45.2
