Re: [PATCH v2 3/3] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 23-09-2024 om 10:12 schreef Xu Yang:
The chipidea controller doesn't fully support sglist, such as it can not
transfer data spanned more dTDs to form a bus packet, so it can only work
on very limited cases.

The limitations as below:
1. the end address of the first sg buffer must be 4KB aligned.
2. the start and end address of the middle sg buffer must be 4KB aligned.
3. the start address of the first sg buffer must be 4KB aligned.

However, not all the use cases violate these limitations. To make the
controller compatible with most of the cases, this will try to bounce the
problem sglist entries which can be found by sglist_get_invalid_entry().
Then a bounced line buffer (the size will roundup to page size) will be
allocated to replace the remaining problem sg entries. The data will be
copied between problem sg entries and bounce buffer according to the
transfer direction. The bounce buffer will be freed when the request
completed.

Acked-by: Peter Chen <peter.chen@xxxxxxxxxx>
Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>

---
Changes in v2:
  - judge ci->has_short_pkt_limit
  - add Ack-by tag
---
  drivers/usb/chipidea/udc.c | 148 +++++++++++++++++++++++++++++++++++++
  drivers/usb/chipidea/udc.h |   2 +
  2 files changed, 150 insertions(+)
[...]
@@ -552,6 +673,8 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
  	struct ci_hdrc *ci = hwep->ci;
  	int ret = 0;
  	struct td_node *firstnode, *lastnode;
+	unsigned int bounced_size;
+	struct scatterlist *sg;
/* don't queue twice */
  	if (hwreq->req.status == -EALREADY)
@@ -559,11 +682,29 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
hwreq->req.status = -EALREADY; + if (hwreq->req.num_sgs && hwreq->req.length &&
+		ci->has_short_pkt_limit) {
+		ret = sglist_get_invalid_entry(ci->dev->parent, hwep->dir,
+					&hwreq->req);
+		if (ret < hwreq->req.num_sgs) {
bounced_size is only initialized here
+			ret = sglist_do_bounce(hwreq, ret, hwep->dir == TX,
+					&bounced_size);
+			if (ret)
+				return ret;
+		}
+	}
+
  	ret = usb_gadget_map_request_by_dev(ci->dev->parent,
  					    &hwreq->req, hwep->dir);
  	if (ret)
  		return ret;
+ if (hwreq->sgt.sgl) {
+		/* We've mapped a bigger buffer, now recover the actual size */
+		sg = sg_last(hwreq->req.sg, hwreq->req.num_sgs);
bounced_size can be uninitialized at this point, if the earlier if condition is false.
+		sg_dma_len(sg) = min(sg_dma_len(sg), bounced_size);
+	}
+

--
Kees




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux