On 10/3/2024 08:27, Mika Westerberg wrote:
On Thu, Oct 03, 2024 at 08:10:11AM -0500, Mario Limonciello wrote:
On 10/3/2024 00:47, Mika Westerberg wrote:
Hi Harry,
On Wed, Oct 02, 2024 at 01:42:29PM -0400, Harry Wentland wrote:
I was checking out the 6.12 rc1 (through drm-next) kernel and found
my system hung at boot. No meaningful message showed on the kernel
boot screen.
A bisect revealed the culprit to be
commit f1bfb4a6fed64de1771b43a76631942279851744 (HEAD)
Author: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Date: Fri Aug 30 18:26:29 2024 +0300
usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface
A revert of this single patch "fixes" the issue and I can boot again.
The system in question is a Thinkpad T14 with a Ryzen 7 PRO 6850U CPU.
It's running Arch Linux but I doubt that's of consequence.
lspci output:
https://gist.github.com/hwentland/59aef63d9b742b7b64d2604aae9792e0
acpidump:
https://gist.github.com/hwentland/4824afc8d712c3d600be5c291f7f1089
Mario suggested I try modprobe.blacklist=xhci-hcd but that did nothing.
Another suggestion to do usbcore.nousb lets me boot to the desktop
on a kernel with the faulty patch, without USB functionality, obviously.
I'd be happy to try any patches, provide more data, or run experiments.
Do you boot with any device connected?
Second thing that I noticed, though I'm not familiar with AMD hardware,
but from your lspci dump, I do not see the PCIe ports that are being
used to tunnel PCIe. Does this system have PCIe tunneling disabled
somehow?
On some OEM systems it's possible to lock down from BIOS to turn off PCIe
tunneling, and I agree that looks like the most common cause.
This is what you would see on a system that has tunnels (I checked on my
side w/ Z series laptop w/ Rembrandt and a dock connected):
+-03.0
+-03.1-[03-32]--
+-04.0
+-04.1-[33-62]----00.0-[34-62]--+-02.0-[35]----00.0
| \-04.0-[36-62]--
00:03.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family
17h-19h PCIe Dummy Host Bridge [1022:14b7] (rev 01)
00:03.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 19h
USB4/Thunderbolt PCIe tunnel [1022:14cd]
00:04.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family
17h-19h PCIe Dummy Host Bridge [1022:14b7] (rev 01)
00:04.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 19h
USB4/Thunderbolt PCIe tunnel [1022:14cd]
Okay this is more like what I expected, although probably not the
reason here.
Are you able to replicate the issue if you disable PCIe tunneling from
the BIOS on your reference system? (Probably not but just in case).
I checked on the Lenovo Z13 laptop I have and turned off "USB port" in
BIOS setup and this caused the endpoints 3.1 and 4.1 I listed above to
disappear but the system still boots up just fine for me on 6.12-rc1.
You don't see anything on the console? It's all blank or it just hangs
after some messages?
I guess it is getting stuck on fwnode_find_reference() because it never
finds the given node?
Looking at the code, I don't see where it could get stuck. If for some
reason there is no such reference (there is based on the ACPI dump) then
it should not affect the boot. It only matters when power management is
involved.
Nothing jumps out to me either. Maybe this is a situation that Harry
can sprinkle a bunch of printk's all over usb_acpi_add_usb4_devlink() to
enlighten what's going on (assuming the console output is "working" when
this happened).
