From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
There are apparently incomplete clones of the HXD type chip in use.
Those return -EPIPE on GET_LINE_REQUEST and BREAK_REQUEST. Avoid
flooding the kernel log with those errors. Detect them during startup
and then use the line_settings cache instead of GET_LINE_REQUEST. Signal
missing break support via -ENOTTY.
Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---
Changes in v2:
- probe for clone and avoid unsupported requests further on
drivers/usb/serial/pl2303.c | 47 ++++++++++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index d93f5d584557..a61ae0d0c4ac 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -181,6 +181,7 @@ enum pl2303_type {
TYPE_TA,
TYPE_TB,
TYPE_HXD,
+ TYPE_HXD_CLONE,
TYPE_HXN,
TYPE_COUNT
};
@@ -192,6 +193,7 @@ struct pl2303_type_data {
unsigned int no_autoxonxoff:1;
unsigned int no_divisors:1;
unsigned int alt_divisors:1;
+ unsigned int no_break_getline:1;
};
struct pl2303_serial_private {
@@ -232,6 +234,11 @@ static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
.name = "HXD",
.max_baud_rate = 12000000,
},
+ [TYPE_HXD_CLONE] = {
+ .name = "HXD",
+ .max_baud_rate = 12000000,
+ .no_break_getline = true,
+ },
[TYPE_HXN] = {
.name = "G",
.max_baud_rate = 12000000,
@@ -466,6 +473,28 @@ static int pl2303_detect_type(struct usb_serial *serial)
return -ENODEV;
}
+static bool pl2303_is_hxd_clone(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+ unsigned char *buf;
+ int ret;
+
+ buf = kmalloc(7, GFP_KERNEL);
+ if (!buf) {
+ dev_err(&serial->interface->dev,
+ "could not check for clone type, not enough memory\n");
+ return false;
+ }
+
+ ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
+ 0, 0, buf, 7, 100);
+
+ kfree(buf);
+
+ return ret == -EPIPE;
+}
+
static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv;
@@ -484,6 +513,9 @@ static int pl2303_startup(struct usb_serial *serial)
if (!spriv)
return -ENOMEM;
+ if (type == TYPE_HXD && pl2303_is_hxd_clone(serial))
+ type = TYPE_HXD_CLONE;
+
spriv->type = &pl2303_type_data[type];
spriv->quirks = (unsigned long)usb_get_serial_data(serial);
spriv->quirks |= spriv->type->quirks;
@@ -724,9 +756,18 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty,
static int pl2303_get_line_request(struct usb_serial_port *port,
unsigned char buf[7])
{
- struct usb_device *udev = port->serial->dev;
+ struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+ struct usb_device *udev = serial->dev;
int ret;
+ if (spriv->type->no_break_getline) {
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+
+ memcpy(buf, priv->line_settings, 7);
+ return 0;
+ }
+
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
@@ -1063,9 +1104,13 @@ static int pl2303_carrier_raised(struct usb_serial_port *port)
static int pl2303_set_break(struct usb_serial_port *port, bool enable)
{
struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
u16 state;
int result;
+ if (spriv->type->no_break_getline)
+ return -ENOTTY;
+
if (enable)
state = BREAK_ON;
else
--
2.43.0
