Add usb3 phy and controller nodes for imx95.
Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
---
Changes in v2:
- no changes
Changes in v3:
- no changes
Changes in v4:
- reorder nodes
Changes in v5:
- no changes
---
arch/arm64/boot/dts/freescale/imx95.dtsi | 43 ++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 425272aa5a81..2377b3ade95a 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1188,5 +1188,48 @@ pcie1_ep: pcie-ep@4c380000 {
power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
status = "disabled";
};
+
+ usb3: usb@4c010010 {
+ compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
+ reg = <0x0 0x4c010010 0x0 0x04>,
+ <0x0 0x4c1f0000 0x0 0x20>;
+ clocks = <&scmi_clk IMX95_CLK_HSIO>,
+ <&scmi_clk IMX95_CLK_32K>;
+ clock-names = "hsio", "suspend";
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+ status = "disabled";
+
+ usb3_dwc3: usb@4c100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x4c100000 0x0 0x10000>;
+ clocks = <&scmi_clk IMX95_CLK_HSIO>,
+ <&scmi_clk IMX95_CLK_24M>,
+ <&scmi_clk IMX95_CLK_32K>;
+ clock-names = "bus_early", "ref", "suspend";
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy>, <&usb3_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,gfladj-refclk-lpm-sel-quirk;
+ snps,parkmode-disable-ss-quirk;
+ iommus = <&smmu 0xe>;
+ };
+ };
+
+ usb3_phy: phy@4c1f0040 {
+ compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
+ reg = <0x0 0x4c1f0040 0x0 0x40>,
+ <0x0 0x4c1fc000 0x0 0x100>;
+ clocks = <&scmi_clk IMX95_CLK_HSIO>;
+ clock-names = "phy";
+ #phy-cells = <0>;
+ power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+ orientation-switch;
+ status = "disabled";
+ };
};
};
--
2.34.1
