Re: [PATCH v4 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 10, 2024 at 03:03:39PM +0800, Xu Yang wrote:
> This board has one Type-C port which has USB3 capability. This will
> add typec nodes and enable usb3 node.
>
> Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
>
> ---
> Changes in v2:
>  - no changes
> Changes in v3:
>  - no changes
> Changes in v4:
>  - no changes
> ---
>  .../boot/dts/freescale/imx95-19x19-evk.dts    | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> index d14a54ab4fd4..46a9cd3d4403 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> @@ -5,6 +5,7 @@
>
>  /dts-v1/;
>
> +#include <dt-bindings/usb/pd.h>
>  #include "imx95.dtsi"
>
>  / {
> @@ -99,6 +100,48 @@ i2c7_pcal6524: i2c7-gpio@22 {
>  		interrupt-parent = <&gpio5>;
>  		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
>  	};
> +
> +	ptn5110: tcpc@50 {
> +		compatible = "nxp,ptn5110", "tcpci";
> +		reg = <0x50>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec>;
> +		interrupt-parent = <&gpio5>;
> +		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
> +
> +		typec_con: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			power-role = "dual";
> +			data-role = "dual";
> +			try-power-role = "sink";
> +			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> +			sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
> +			op-sink-microwatt = <0>;
> +			self-powered;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					typec_con_hs: endpoint {
> +						remote-endpoint = <&usb3_data_hs>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					typec_con_ss: endpoint {
> +						remote-endpoint = <&usb3_data_ss>;
> +					};
> +				};
> +			};
> +		};
> +	};
>  };
>
>  &lpuart1 {
> @@ -128,6 +171,38 @@ &pcie1 {
>  	status = "okay";
>  };
>
> +&usb3 {
> +	status = "okay";
> +};
> +
> +&usb3_phy {
> +	status = "okay";
> +
> +	port {
> +		usb3_data_ss: endpoint {
> +			remote-endpoint = <&typec_con_ss>;
> +		};
> +	};
> +};

Please keep node name alphabet order
usb3_phy should be after usb3_dwc3.

Frank

> +
> +&usb3_dwc3 {
> +	dr_mode = "otg";
> +	hnp-disable;
> +	srp-disable;
> +	adp-disable;
> +	usb-role-switch;
> +	role-switch-default-mode = "peripheral";
> +	snps,dis-u1-entry-quirk;
> +	snps,dis-u2-entry-quirk;
> +	status = "okay";
> +
> +	port {
> +		usb3_data_hs: endpoint {
> +			remote-endpoint = <&typec_con_hs>;
> +		};
> +	};
> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> @@ -245,6 +320,12 @@ IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x31e
>  		>;
>  	};
>
> +	pinctrl_typec: typecgrp {
> +		fsl,pins = <
> +			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
> +		>;
> +	};
> +
>  	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
>  		fsl,pins = <
>  			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0		0x31e
> --
> 2.34.1
>




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux