[PATCH 1/5] usb: xhci: Fix handling errors mid TD followed by other errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some host controllers fail to produce the final completion event on an
isochronous TD which experienced an error mid TD. We deal with it by
flagging such TDs and checking if the next event points at the flagged
TD or at the next one, and giving back the flagged TD if the latter.

This is not enough, because the next TD may be missed by the xHC. Or
there may be no next TD but a ring underrun. We also need to get such
TD quickly out of the way, or errors on later TDs may be handled wrong.

If the next TD experiences a Missed Service Error, we will set the skip
flag on the endpoint and then attempt skipping TDs when yet another
event arrives. In such scenario, we ought to report the 'erorr mid TD'
transfer as such rather than skip it.

Another problem case are Stopped events. If we see one after an error
mid TD, we naively assume that it's a Force Stopped Event because it
doesn't match the pending TD, but in reality it might be an ordinary
Stopped event for the next TD, which we fail to recognize and handle.

Fix this by moving error mid TD handling before the whole TD skipping
loop. Remove unnecessary conditions, always give back the TD if the new
event points to any TRB outside it or if the pointer is NULL, as may be
the case in Ring Underrun and Overrun events on 1st gen hardware. Only
if the pending TD isn't flagged, consider other actions like skipping.

As a side effect of reordering with skip and FSE cases, error mid TD is
reordered with last_td_was_short check. This is harmless, because the
two cases are mutually exclusive - only one can happen in any given run
of handle_tx_event().

Tested on the NEC host and a USB camera with flaky cable. Dynamic debug
confirmed that Transaction Errors are sometimes seen, sometimes mid-TD,
sometimes followed by Missed Service. In such cases, they were finished
properly before skipping began.

Signed-off-by: Michal Pecio <michal.pecio@xxxxxxxxx>
---
 drivers/usb/host/xhci-ring.c | 70 +++++++++++++++++-------------------
 1 file changed, 32 insertions(+), 38 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 4ea2c3e072a9..0cab482b3f4e 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2764,6 +2764,30 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		return 0;
 	}
 
+	/*
+	 * xhci 4.10.2 states isoc endpoints should continue
+	 * processing the next TD if there was an error mid TD.
+	 * So host like NEC don't generate an event for the last
+	 * isoc TRB even if the IOC flag is set.
+	 * xhci 4.9.1 states that if there are errors in mult-TRB
+	 * TDs xHC should generate an error for that TRB, and if xHC
+	 * proceeds to the next TD it should genete an event for
+	 * any TRB with IOC flag on the way. Other host follow this.
+	 *
+	 * We wait for the final IOC event, but if we get an event
+	 * anywhere outside this TD, just give it back already.
+	 */
+	td = list_first_entry_or_null(&ep_ring->td_list,
+						struct xhci_td, td_list);
+
+	if (td && td->error_mid_td && !trb_in_td(xhci, td, ep_trb_dma, false)) {
+		xhci_dbg(xhci, "Missing TD completion event after mid TD error\n");
+		ep_ring->dequeue = td->last_trb;
+		ep_ring->deq_seg = td->last_trb_seg;
+		inc_deq(xhci, ep_ring);
+		xhci_td_cleanup(xhci, td, ep_ring, td->status);
+	}
+
 	do {
 		/* This TRB should be in the TD at the head of this ring's
 		 * TD list.
@@ -2828,44 +2852,14 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				return 0;
 			}
 
-			/*
-			 * xhci 4.10.2 states isoc endpoints should continue
-			 * processing the next TD if there was an error mid TD.
-			 * So host like NEC don't generate an event for the last
-			 * isoc TRB even if the IOC flag is set.
-			 * xhci 4.9.1 states that if there are errors in mult-TRB
-			 * TDs xHC should generate an error for that TRB, and if xHC
-			 * proceeds to the next TD it should genete an event for
-			 * any TRB with IOC flag on the way. Other host follow this.
-			 * So this event might be for the next TD.
-			 */
-			if (td->error_mid_td &&
-			    !list_is_last(&td->td_list, &ep_ring->td_list)) {
-				struct xhci_td *td_next = list_next_entry(td, td_list);
-
-				ep_seg = trb_in_td(xhci, td_next, ep_trb_dma, false);
-				if (ep_seg) {
-					/* give back previous TD, start handling new */
-					xhci_dbg(xhci, "Missing TD completion event after mid TD error\n");
-					ep_ring->dequeue = td->last_trb;
-					ep_ring->deq_seg = td->last_trb_seg;
-					inc_deq(xhci, ep_ring);
-					xhci_td_cleanup(xhci, td, ep_ring, td->status);
-					td = td_next;
-				}
-			}
-
-			if (!ep_seg) {
-				/* HC is busted, give up! */
-				xhci_err(xhci,
-					"ERROR Transfer event TRB DMA ptr not "
-					"part of current TD ep_index %d "
-					"comp_code %u\n", ep_index,
-					trb_comp_code);
-				trb_in_td(xhci, td, ep_trb_dma, true);
-
-				return -ESHUTDOWN;
-			}
+			/* HC is busted, give up! */
+			xhci_err(xhci,
+				"ERROR Transfer event TRB DMA ptr not "
+				"part of current TD ep_index %d "
+				"comp_code %u\n", ep_index,
+				trb_comp_code);
+			trb_in_td(xhci, td, ep_trb_dma, true);
+			return -ESHUTDOWN;
 		}
 
 		if (ep->skip) {
-- 
2.43.0





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux